Stock suspension geometry on the Maverick AWD and Bronco Sport AWD prioritizes comfort over stance and handling sharpness. Belltech's performance handling kit addresses both, pairing height-adjustable front coilovers with tuned rear dampers and an adjustable coil spring system to drop the ride height and sharpen suspension response in a single bolt-on package. Fitment covers 2022-2026 Ford Maverick AWD and 2021-2026 Ford Bronco Sport AWD.
Front coilovers built for real adjustability. The front coilovers come pre-assembled with new top mounts and offer 2 inches of fine-tuned ride height adjustment, letting you set the front end anywhere from 2 to 4 inches below stock. A galvanized finish protects the strut body from corrosion across demanding daily-driven environments. Because they arrive pre-assembled, installation is straightforward and does not require special spring compressors or extra shop time.
Rear dampers tuned to match the front. Belltech's Street Performance rear shocks use preset damping forces calibrated specifically to complement the front coilovers, keeping suspension behavior balanced and controlled through corners and over surface changes. Shortened shock length is optimized for the available rear lowering range, preserving proper suspension travel throughout the full operating range rather than simply stacking on travel-limiting hardware.
Adjustable rear coil spring system. Anodized aluminum spring perches keep weight low while resisting corrosion. The rear system offers 2 inches of adjustability across a 3-to-5-inch drop range. A supplied upper spring seat adapter secures the new coil spring between the body and the adjustable perch, simplifying installation and eliminating the need to source additional hardware.
Product Benefits
- Front Drop Range: Adjustable from 2 to 4 inches below stock ride height.
- Rear Drop Range: Adjustable from 3 to 5 inches below stock ride height.
- Pre-Assembled Coilovers: Front units ship ready to install with new top mounts included.
- Balanced Damping: Rear shock valving is tuned to work in concert with the front coilovers.
- Anodized Aluminum Perches: Lightweight, strong, and corrosion resistant for lasting performance.
- Galvanized Strut Finish: Protects front and rear struts from rust and environmental wear.
- Complete Hardware Included: Upper spring seat adapter and all necessary hardware ship with the kit.
- Bolt-On Installation: No cutting or major fabrication required for a clean install.
Note: Fits 2022-2026 Ford Maverick AWD and 2021-2026 Ford Bronco Sport AWD only. Does not fit 2WD/FWD Maverick or Bronco Sport variants.
About Belltech: Belltech has specialized in truck and SUV lowering suspension systems for decades, engineering kits that balance aggressive stance with real-world drivability. Every Belltech kit is developed to work as a complete system rather than a collection of individual parts, ensuring matched performance across all installed components.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Fitment | 2021, 2022, 2023, 2024, 2025, 2026 |
