Forged from a single billet, the APEX VS-5RS arrives at 21.3 lbs in a 20x11 ET52 fitment that fills the S197 through S650 Mustang wheel arch with zero compromise between weight and structural integrity.
Forged construction at a real-world weight. The VS-5RS uses a forged process that produces a denser, stronger wheel than cast alternatives, then removes material aggressively through the spoke geometry to hit 21.3 lbs in this 20x11 size. That weight savings pays dividends in reduced unsprung and rotational mass, which sharpens steering response and reduces the load on suspension components.
Sprint Line engineering behind the design. The VS-5RS belongs to APEX's Sprint Line family, a group of wheels developed specifically for track and performance street use. The five-spoke RS profile balances torsional rigidity under braking and cornering loads with enough open face to clear a wide range of big-brake kits common on modified Mustangs.
Brushed Clear finish built for consistent upkeep. The brushed clear coat preserves the directional grain of the aluminum while protecting against brake dust, road grime, and corrosion. The finish cleans up easily and does not require specialized wheel cleaner chemistry to maintain its appearance.
ET52 offset dialed for the Mustang platform. The 52mm positive offset positions the wheel correctly within the fender line across the 2005-2026 Mustang range, keeping the contact patch centered under the suspension pickup points without rubbing or excessive poke.
Product Benefits
- Forged Construction: Higher strength-to-weight ratio than cast wheels of comparable size.
- 21.3 lb Weight: Reduced unsprung and rotational mass improves steering feel and suspension response.
- 20x11 ET52 Fitment: Sized and offset for 2005-2026 Mustang applications.
- Sprint Line Family: Track-oriented design lineage with clearance for large aftermarket brake systems.
- Brushed Clear Finish: Durable coating over a directional brushed aluminum face; easy to maintain.
- Broad Year Coverage: Spans S197, S550, and S650 Mustang generations in a single fitment.
About APEX Wheels: APEX Wheels develops forged and flow-formed aluminum wheels aimed at track-day drivers and performance street enthusiasts. The company focuses exclusively on fitment-specific engineering for popular performance platforms, validating each wheel design against real-world track loads rather than minimum DOT standards alone.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 1 Hour
- Vehicle Fitment:
- 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
