Forged construction at 23.3 pounds in a 19x11 ET26 fitment: the APEX ML-10RT delivers the structural integrity of a competition wheel with a finish that works just as well on a weekend canyon run as it does on a road course.
Forged for real performance use. The ML-10RT comes from APEX's Touring Line and uses a forged construction process that produces a denser, stronger wheel at a lower weight than comparable cast units. At 23.3 lbs for a 19x11, the rotational mass savings translate directly into sharper throttle response, more responsive braking, and better steering feedback.
Purpose-built dimensions for the Mustang platform. The 19x11 diameter and width combination suits the rear-biased performance setup common across 2005-2026 Mustangs. The ET26 offset positions the wheel correctly within the fender envelope, giving clearance for big brake kits and aftermarket suspension geometry without requiring spacers or fender modifications on a stock body.
Race Silver with a Machined Lip finish. The two-tone appearance pairs a Race Silver face with a machined lip, a combination that holds up under the heat cycles and brake dust that come with spirited driving. The finish does not demand the same obsessive maintenance that a fully polished or painted wheel would require.
Product Benefits
- Forged Construction: Higher structural integrity and better strength-to-weight ratio compared to cast wheels.
- 23.3 lb Wheel Weight: Reduced unsprung and rotational mass improves braking, acceleration, and steering feel.
- 19x11 ET26 Fitment: Sized and offset for 2005-2026 Mustang platforms without requiring additional spacers on a stock body.
- Touring Line Pedigree: Developed within APEX's Touring Line for combined street and track use.
- Race Silver Machined Lip Finish: Two-tone appearance that resists the wear and heat cycles of performance driving.
- Broad Fitment Range: Compatible across all 2005-2026 Mustang generations, including S197 and S550 platforms.
About APEX Wheels: APEX Wheels focuses exclusively on forged and flow-formed performance wheels engineered around specific vehicle platforms. Every design is validated for track use, and fitment data is developed against actual vehicle geometry rather than generic bolt-pattern compatibility charts.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 1 Hour
- Vehicle Fitment:
- 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
