Forged construction and a motorsport-derived spoke geometry put the APEX ML-10RT in a different category than cast wheels at this price point, and the Gloss Motorsport Gold finish with machined lip gives it a look that works equally well on track and on the street.
Flow-forged strength at a real-world weight. The ML-10RT tips the scale at 22.4 lbs in the 19x10 ET40 configuration, a figure that reflects the density advantages of forged aluminum over cast. Reduced unsprung and rotational mass translates directly into sharper steering response and faster suspension reaction across every corner.
A fitment that spans twenty years of Mustang. The 19x10 ET40 spec covers 2005 through 2026 Mustang platforms, making the ML-10RT a reliable choice whether the car is an S197, S550, or S650. Owners upgrading to wider rubber or fitting track-day tires will find the 10-inch width supports a broad range of performance tire sizes.
Gloss Motorsport Gold finish with machined lip. The two-tone treatment pairs a high-gloss gold face against a precise machined lip, giving the wheel visual depth without relying on chrome or heavy clearcoat. The finish is applied over the forged blank before final machining so the lip retains a clean, sharp edge.
Part of the APEX Touring Line. The ML-10RT sits within APEX's Touring Line family, a series optimized for enthusiasts who drive their cars on both public roads and circuits. The spoke design balances lateral stiffness with enough compliance to survive real-world road surfaces without cracking.
Product Benefits
- Forged Construction: Higher strength-to-weight ratio compared to cast wheels at the same diameter and width.
- 22.4 lb Wheel Weight: Confirmed weight in 19x10 ET40 reduces unsprung mass and rotational inertia.
- 19x10 ET40 Spec: Wide stance with a positive offset dialed in for the Mustang suspension geometry.
- 2005-2026 Mustang Fitment: Covers S197, S550, and S650 platforms in a single SKU.
- Gloss Motorsport Gold with Machined Lip: Two-tone finish with a precision-cut lip for visual contrast and depth.
- Touring Line Engineering: Spoke geometry tuned for combined street and track use.
About APEX Wheels: APEX Wheels develops forged and flow-formed aluminum wheels specifically for performance and track-day driving. Every design goes through rigorous structural validation, and the company maintains a strong reputation among road-course Mustang owners for wheels that hold up under repeated heat cycles and sustained lateral loads.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 1 Hour
- Vehicle Fitment:
- 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
