Forged construction at 21.4 lbs gives the APEX ML-10RT a weight advantage that stock cast wheels cannot match, translating directly into reduced unsprung mass and sharper steering response on your 2005-2026 Mustang.
Forged monoblock construction. Forging compresses the aluminum grain structure for greater strength at lower weight than casting. At 21.4 lbs in the 18x10 ET40 specification, the ML-10RT cuts rotational inertia without sacrificing the structural integrity demanded by track and street use alike.
Anthracite finish with machined lip contrast. The two-tone anthracite barrel pairs with a machined lip for a clean, purposeful look that suits both road and track environments. The machined surface reveals the natural aluminum beneath and resists the monotony of a single-finish wheel.
Touring Line engineering for real-world versatility. The ML-10RT sits within APEX's Touring Line, a family developed to balance everyday drivability with the structural demands of spirited driving. The ET40 offset positions the wheel correctly within the Mustang's suspension geometry across all S197 and S550 generations through 2026, maintaining proper scrub radius and bearing load.
18x10 fitment opens tire options. A 10-inch width in the 18-inch diameter accommodates a wide range of performance tire sizes on the rear axle, giving owners flexibility to run staggered or square setups depending on their build goals.
Product Benefits
- Forged Construction: Greater strength-to-weight ratio compared to cast alternatives.
- 21.4 lb Wheel Weight: Reduced unsprung and rotational mass for improved acceleration, braking, and steering feel.
- Anthracite with Machined Lip: Two-tone finish adds visual depth without aftermarket excess.
- ET40 Offset: Correct geometry for 2005-2026 Mustang suspension across S197 and S550 platforms.
- 18x10 Dimensions: Wide stance supports a broad selection of performance rear tire fitments.
- Touring Line Pedigree: Engineered for both street durability and track-capable performance.
- Broad Year Coverage: Single part number fits 2005 through 2026 Mustang applications.
About APEX Wheels: APEX Wheels specializes in forged and flow-formed aluminum wheels engineered specifically for enthusiast and track applications. Every APEX wheel is developed with real-world load and fatigue testing, and the brand's Mustang fitments are among the most thoroughly validated in the segment.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 1 Hour
- Vehicle Fitment:
- 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
