Steeda Mustang Lightweight Radiator Support (2005-2010)

4 Review(s)
$22.00 (10%)
Steeda's Lightweight Tubular Front Radiator Support was the first one on the market that allowed you to maintain your front swaybar and reduce weight at the same time!

Part Number: 555 5075
Write a Review


Steeda's Lightweight Tubular Front Radiator Support was the first one on the market that allowed you to maintain your front swaybar and reduce weight at the same time! Our competitors took years before catching on to this.

Our engineers designed this support from super strong and light 4130 chrome moly alloy steel material. This resulted in a tubular support that is much lighter than the factory piece. Your factory radiator support weighs in at 17 pounds, our easy to install radiator support comes in at less than 7 pounds, for an easy 10+ pound weight reduction off the front of the car. That is over half the weight of the stock steel unit and yet is still strong enough for you to run your front swaybar when not at the drag strip and tough enough to withstand the rigors of autocross and road course competition. This support is the perfect item for the road course/autocross car to reduce front end weight and improve weight distribution. Drag racers who remove their front sway bar can expect up to 25 pounds or more reduction combined.

Compared to changing the K-member our tubular radiator support improves weight distribution by 0.3% and takes weight right off the nose of the car which is ideal. A typical tubular K-member improves weight distribution 0.4%, yet costs many hundreds of dollars more, is much more complicated/costly to install which ads even more cost, and is not removing weight from the front nose of the vehicle, making ours the best bang for your buck piece for performance and weight reduction.

Our tubular radiator support works with or without the swaybar. Fits the factory original, Steeda, and most aftermarket front swaybars. Unlike sway bar eliminator kits, Steeda's S197 specific radiator support is just as light and allows you to reinstall your old sway bar should your driving habits change.

Our radiator support is tig welded and powdercoated in silver metal flake which makes for a great looking piece. It accepts all factory hardware also. This brace bolts directly in place of the factory piece and can be installed by practically anyone in their garage or driveway.

Product Benefits
  • Made from High Strength 4130 Steel
  • Light weight and lose it off the front of the car!
  • OEM Quality and Easy installation
  • A Must for any Hardcore Drag strip enthusiast

CA Residents: Cancer and Reproductive Harm WARNING

Hi, I'm Gus with Steeda Autosports. If you're looking to take some weight out of the front end of your car, there is no better bang for the buck than our Steeda Radiator Support. Our Steeda radiator support is made out of 4130 Chromalloy alloy steel making it ten pounds lighter than the stock radiator support. It directly bolts in place of the stock radiator support with ease and we were the first ones to ever incorporate the factory sway bar brackets into the radiator support. This not only great for drag racing for the weight reduction this will withstand the punishment of road racing and anything you'll throw at it in that environment. Available for 2005 thru 2014 Mustang. Find out more or place your order at
View Full Transcript

Fitment & Features


Manufacturer: Steeda Autosports
Made in USA: Yes

Installation Information:

Level of Difficulty: Easy
Install Time: About 1 1/2 Hours
Tools Required: Basic Shop Tools
Print Instructions: Installation Instructions

Vehicle Fitment:

Fits Model Year: 2005, 2006, 2007, 2008, 2009, 2010

Customer Reviews

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings


Thumbs up
Good fit and easy install. Took some weight off the front, lost 20 lbs from the front at the track when the sway bar is off. I’m running 12s in an almost stock auto 3 valve. All the parts are Steeda with the exception on the 4.10s
Did you find this helpful?  2 of 3 Found Helpful
No brainer!
You guys wanna save weight on your car? Get this product, installs in minutes!
Did you find this helpful?  1 of 2 Found Helpful
Saves alot of weight
Saves alot of weight off the front end, which is where we need it on these cars! Very easy install, just make sure to secure all lines that use to attach to the OEM hunk of metal.
Did you find this helpful? 
One of a kind piece
Very happy with the Steeda lightweight Rdaitor support brace. Not only is it strong and lighter, but it allows you to retain the swaybar if you like which the others do not.
Did you find this helpful?  1 of 1 Found Helpful
There are no reviews for this product!

Related Items

123123 - 1
Back to TOP
0 Items