Stock rotors on daily-driven performance vehicles accumulate gas, moisture, and debris between pad and rotor face, gradually degrading pedal feel and braking consistency. EBC's USR Slotted Rotors for the 2013-2020 Ford Escape 1.6 Turbo 4WD address that directly, sweeping the contact zone clean on every rotation while enforcing the flat, parallel pad wear that keeps braking predictable from the first stop to the last.
Progressive slot geometry does the real work. The narrower multi-slot pattern, machined at a progressive angle across the rotor face, evacuates gas, water, dirt, and debris without the aggressive edge loading of a drilled design. That geometry also eliminates the ridge buildup on pads and rotor faces that conventional and drilled-only rotors allow over time, a common cause of inconsistent pedal feel and uneven wear.
Premium grey iron construction, precision-machined in the UK or USA. Every USR blank starts as R90-approved G3000 grey iron, sourced and machined inside EBC's own facilities. Batch metallurgy checks, X-ray inspection, balance verification, and dimensional checks happen before any rotor ships. That level of in-house control, covering 92% of everything EBC sells, means the rotor arriving at your door has been validated rather than assumed.
Optimized for fast street driving, not just track days. The USR range targets drivers who push hard on public roads. The slot geometry is tuned to minimize noise, so the rotor delivers sport-rotor braking characteristics without the drone or squeal that wider, more aggressive slot patterns can introduce. Pair these rotors with a matching EBC high-friction pad set to maximize both bite and rotor longevity.
Product Benefits
- Progressive Slot Design: Machined at an angle across the face to clear gas, water, and debris with each wheel rotation.
- Parallel Pad Wear: Slot geometry prevents ridge buildup on pads and rotor faces, keeping braking consistent throughout wear life.
- R90-Approved G3000 Grey Iron: Premium rotor blanks meet rigorous European safety and quality standards.
- UK or USA Manufactured: Precision-machined in EBC's own plants, not outsourced to unverified suppliers.
- Silent Street Design: Narrow multi-slot pattern delivers sport-rotor performance without excessive noise on daily drives.
- Extensive Quality Control: Every batch undergoes metallurgy, X-ray, balance, and dimensional inspection before shipment.
- Direct Fit: Front fitment specific to the 2013-2020 Ford Escape 1.6 Turbo 4WD for a straightforward swap.
About EBC Brakes: EBC Brakes manufactures 92% of everything it sells inside its own facilities in the United Kingdom and the United States, making it one of the largest vertically integrated brake brands in the world. Its product line spans pads, rotors, and brake kits for street, track, and off-road applications, all developed and validated under BS5750 and ISO quality accreditations.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | SE, SEL, Titanium, ST, S |
| Vehicle Fitment | 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 |
| FMSI Pad No. | D1668 |
