Stock rotors tolerate daily commutes; the EBC Fusion 2.3 USR Slotted Rotors are built for drivers who push harder, demand consistent stopping power, and want a rear brake upgrade that stays quiet on the street while delivering genuine sport performance.
Premium grey iron construction. Each rotor starts as an R90-approved G3000 grey iron blank, precision machined to exacting tolerances. This grade of material provides the density and thermal stability needed to handle repeated hard stops without the surface cracking or warping that cheaper castings invite.
Narrow multi-slot design with a progressive angle. The slots are machined at a deliberate progressive angle rather than cut straight across the face. This geometry expels gas, water, dirt, and debris from the pad-to-rotor interface on every rotation while keeping noise to a minimum. The result is a sport rotor that performs without the drone or squeal that aggressive drilled designs often produce.
Flat, parallel pad wear over the life of the rotor. Drilled-only rotors allow ridges to form on pad surfaces over time, which reduces contact area and introduces inconsistency into pedal feel. The USR slot pattern prevents ridge formation, keeping pads and rotors wearing evenly from the first bedding cycle through the last mile of use. Consistent contact means consistent braking, which matters most when it is needed most.
Manufactured in the UK or USA. EBC Brakes produces 92 percent of everything it sells in its own plants, and all EBC rotors are British-made or precision machined in the USA. Every bought-in component passes batch metallurgy checks, X-ray inspection, balance verification, and dimensional audits before it reaches the assembly floor.
Product Benefits
- R90-Approved G3000 Grey Iron: Premium rotor blanks meet European brake component safety standards for street and performance use.
- Progressive Slot Angle: Channels gas, water, and debris away from the pad face without generating excessive noise.
- Parallel Pad Wear: Slot geometry prevents ridge buildup on pads and rotor faces, keeping brake feel consistent throughout the wear cycle.
- Quiet Street Operation: Narrower slot design keeps the USR range significantly quieter than comparable drilled or wide-slotted rotors.
- UK and USA Manufacturing: Machined in EBC's own plants under ISO and BS5750 quality accreditations.
- Rear Fitment: Direct replacement for the rear axle of 2006-2009 Fusion 2.3 applications.
- Pairs With EBC Pad Sets: Performance gains increase when matched with a compatible EBC high-friction brake pad compound.
About EBC Brakes: EBC Brakes manufactures the majority of its product range in its own UK and USA facilities, operating under BS5750 and ISO quality accreditations. The brand covers everything from street pads and rotors to full race friction compounds, and every incoming component, whether made in-house or sourced externally, passes rigorous metallurgy, X-ray, balance, and dimensional inspection before use.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Fitment | 2006, 2007, 2008, 2009 |
| FMSI Pad No. | D1180 |
