Stock rotors on the 2000-2001 F-150 4.2L 2WD were designed to meet every-day driver demands, not a performance standard. EBC's RK7155 rear rotors replace them with G3000 spec cast iron units that meet OE fitment requirements while adding a corrosion-resistant Gen 3 silver grey Geomet-style coating that holds up far better than the black etch paint found on older aftermarket rotors.
G3000 cast iron construction. Every RK7155 rotor is cast from G3000 specification iron, the same grade used in quality OE brake components. The material delivers consistent thermal capacity, predictable wear, and dimensional stability across the operating range of a half-ton truck.
Gen 3 silver grey Geomet coating. EBC's latest surface treatment is applied at the casting facility immediately after machining and washing, leaving no window for bare iron to oxidize before coating. The result is a finish with significantly higher corrosion resistance than thermic black versions, and a silver-grey appearance that closely matches factory rotor colors. If only one axle is being replaced, the vehicle still looks uniform front to back after bedding in.
100% runout inspection, no exceptions. Every rotor EBC produces passes through a dedicated runout inspection process before it ships. Rotors that exceed tolerance are rejected outright, eliminating the disc thickness variation that causes brake pedal pulsation after several thousand miles of use.
Direct fit for Wheel ABS applications. The RK7155 is engineered specifically for the rear axle of 2000-2001 F-150 4.2L 2WD trucks equipped with Wheel ABS, preserving proper sensor clearance and hub geometry without modification.
European and North American production. Over 80 percent of EBC's rotor castings originate in European foundries, and all sport rotor machining is performed in either the UK or the USA. That supply chain gives EBC tight control over material quality and dimensional consistency.
Product Benefits
- G3000 Cast Iron: OE-grade iron spec delivers consistent braking performance and long rotor life.
- Gen 3 Geomet Coating: Silver grey finish resists corrosion far better than older black etch coatings.
- Plant-Applied Finish: Coating applied immediately post-machining prevents pre-coat surface oxidation.
- 100% Runout Inspected: Every rotor is individually checked before shipping to ensure true disc alignment.
- Wheel ABS Compatible: Engineered to preserve proper ABS sensor clearance on the rear axle.
- Direct Replacement Fit: Bolts into factory locations on 2000-2001 F-150 4.2L 2WD with no modification.
- Matched Appearance: Silver grey finish closely mirrors OEM rotor color for a consistent look across axles.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing rotors, pads, and brake kits for automotive, motorcycle, and motorsport applications. With casting facilities primarily in Europe and machining operations in the UK and USA, EBC maintains direct control over material sourcing and dimensional quality across its full rotor lineup.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, Lariat, XL, XLT, King Ranch |
| Vehicle Fitment | 2000, 2001, 2002, 2003 |
| FMSI Pad No. | D711 |
