Stock rotors on the 2000-2004 F-150 4.2L 4WD were built to meet daily driver demands, not a performance standard. EBC's RK7134 front premium rotors replace them with G3000 spec cast iron units, individually runout-inspected, and finished in EBC's Gen 3 silver grey Geomet-style corrosion-resistant coating.
G3000 cast iron construction. EBC machines these rotors from G3000 specification cast iron, the same grade used by original equipment suppliers. Tight runout tolerances prevent the disc thickness variation that causes pedal pulsation and vibration after a few thousand miles of driving.
Gen 3 silver grey coating. Every rotor leaves the casting plant coated immediately after machining and washing, closing the window where bare iron begins to surface-corrode. The silver grey Geomet-style finish carries significantly higher corrosion resistance than older black etch paint, and the silver hub appearance blends naturally with factory rotor colors on the opposite axle if only one end is being replaced.
100 percent runout inspection, no exceptions. Each rotor passes through a dedicated runout inspection machine before it ships. Rotors that fall outside tolerance are pulled, so every unit that arrives at your door is confirmed straight and true.
European and North American production. Over 80 percent of EBC rotor castings originate in Europe, and all machining for sport rotors is completed in either the UK or the USA. That production chain keeps material traceability tight and quality consistent across every batch.
Product Benefits
- Direct-Fit Front Replacement: Engineered specifically for the 2000-2004 F-150 4.2L 4WD, seven-lug configuration.
- G3000 Cast Iron: OE-grade iron specification for consistent friction, heat management, and longevity.
- Gen 3 Geomet Coating: Silver grey corrosion-resistant finish applied at the casting plant immediately after machining.
- 100% Runout Inspected: Every individual rotor is checked on a dedicated inspection machine before shipping.
- Reduced Pulsation Risk: Tight runout tolerances prevent disc thickness variation that causes pedal vibration over time.
- Cosmetically Compatible: Silver hub finish matches factory rotor appearance when only one axle is upgraded.
- Environmentally Controlled Coating Facility: Air-quality-controlled painting process reduces environmental impact versus traditional coating methods.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing rotors, pads, and brake kits for passenger, performance, and commercial vehicles. With machining operations in the UK and USA and casting facilities primarily in Europe, EBC maintains direct control over material quality and dimensional accuracy across its full rotor lineup.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, Lariat, XL, XLT, King Ranch |
| Vehicle Fitment | 2000, 2001, 2002, 2003, 2004 |
| FMSI Pad No. | D702 |
