Stock rotors on the 1994-2004 Mustang Cobra were built to handle the average commute, not a performance or longevity standard. EBC's RK7024 rear rotors replace them with G3000 spec cast iron units that meet OE tolerances, pass 100% runout inspection, and arrive coated in EBC's Gen 3 silver grey Geomet-style finish for lasting corrosion resistance.
Gen 3 silver grey coating sets a new bar. EBC's latest surface treatment is applied at the casting facility immediately after machining and washing, leaving zero window for bare iron to oxidize before coating. The result is far higher corrosion resistance than the older black etch paint, and a silver appearance that closely matches factory rotor colors so a single-axle swap does not create a visual mismatch front to rear.
G3000 cast iron, machined in the UK or USA. EBC sources over 80% of rotor castings from European facilities and performs all sport rotor machining in either the United Kingdom or the United States. G3000 spec iron delivers the hardness and thermal stability needed to resist disc thickness variation, the root cause of brake pedal pulsation that typically shows up between 3,000 and 4,000 miles on inferior rotors.
Every rotor passes runout inspection before it ships. No EBC rotor leaves the facility without being measured on a dedicated runout inspection machine. That 100% inspection rate means each rotor arrives within spec, so if runout appears after installation, the source is almost always a chassis alignment issue rather than the rotor itself.
Product Benefits
- Direct Rear Fitment: Designed specifically for 1994-2004 Mustang 4.6L Cobra rear brake applications.
- Gen 3 Geomet-Style Coating: Silver grey finish applied at the casting plant for maximum corrosion resistance and clean aesthetics.
- G3000 Spec Cast Iron: OE-grade iron resists disc thickness variation and the pedal pulsation it causes.
- 100% Runout Inspected: Every rotor is measured before shipment to guarantee proper disc alignment out of the box.
- European Castings, UK/USA Machining: Premium sourcing and machining standards throughout production.
- Color-Matched Appearance: Silver hub and hat finish closely mirrors factory rotor colors for a consistent look across both axles.
- Environmentally Controlled Coating Process: Painting integrated into casting production reduces surface corrosion risk and improves coating adhesion.
About EBC Brakes: EBC Brakes is a UK-based manufacturer specializing in brake rotors, pads, and brake system components for street, towing, and performance applications. With machining facilities in the UK and USA and a catalog spanning thousands of vehicle fitments, EBC builds to OE dimensional standards while delivering material and coating upgrades that outlast generic replacement parts.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | SVT Cobra, GT Bullitt, SVT Cobra 10th Anniversary |
| Vehicle Fitment | 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2003, 2004 |
| FMSI Pad No. | D627 |
