Stock rotors on the 1994-1998 Mustang V6 3.8L were built for daily commutes, and years of heat cycles, road salt, and daily driving take a measurable toll. EBC's RK7020 front rotors replace the factory units with G3000 spec cast iron discs that meet OE dimensional tolerances while adding a significantly more corrosion-resistant finish.
Gen 3 Silver Grey Geomet Coating. EBC transitioned to its latest-generation silver grey coating in early 2023. Applied directly in the casting plant immediately after machining and washing, the coating bonds before surface oxidation can set in. The result is far higher corrosion resistance than the former black etch paint, and a silver hub appearance that closely matches the look of factory rotors on the opposite axle if only one end of the car has been upgraded.
G3000 Spec Cast Iron construction. Every rotor in the EBC lineup starts from G3000 grade iron, the same material specification used by original equipment suppliers. Over 80 percent of EBC rotor castings come from European foundries, and all sport rotor machining is performed in either the UK or the USA. That sourcing controls metallurgy and dimensional consistency in ways that cheap import blanks simply cannot.
100 percent runout inspection, no exceptions. Every single rotor EBC ships passes through a dedicated runout inspection machine before it leaves the facility. Keeping runout within spec prevents disc thickness variation, the root cause of the pulsation and vibration that shows up after 3,000 to 4,000 miles on poorly manufactured replacements. If runout appears after a correct installation, EBC notes the cause is almost always a chassis alignment issue from a prior curb strike or pothole, not the rotor itself.
Product Benefits
- Direct Front Fitment: Engineered specifically for the 1994-1998 Ford Mustang V6 3.8L front axle.
- Gen 3 Geomet Coating: Silver grey finish delivers substantially better corrosion resistance than black etch paint alternatives.
- G3000 Cast Iron: OE-grade iron spec ensures proper heat dissipation and long rotor life.
- European and USA Production: Castings sourced from European foundries; machining completed in the UK or USA.
- 100% Runout Inspected: Every rotor is individually checked on a dedicated inspection machine before shipment.
- Coating Applied at Casting: Bonded immediately after machining prevents surface oxidation from forming before the finish is applied.
- OE Appearance Match: Silver hub color after bedding closely matches factory rotor aesthetics on unmixed axles.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer with production facilities in the UK and USA, supplying performance and OE-replacement brake components for automotive and powersports applications worldwide. The brand controls its rotor production from casting sourcing through final inspection, with a focus on dimensional accuracy and material quality.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, GT, GTS, SVT Cobra, GT Bullitt, Mach 1, SVT Cobra 10th Anniversary |
| Vehicle Fitment | 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 |
| FMSI Pad No. | D804 |
