EBC F-150 2.7L 2WD 350mm GD Sport Rear Rotors (2021-2026)

Stock rotors on the F-150 2.7L handle everyday driving, but sustained hard braking, towing, or spirited canyon runs push pad temperatures well past the point where fade becomes a real concern. EBC's GD7844 GD Sport Rotors address that heat problem directly, combining wide-aperture slots and dimple drilling to pull cool air through the pad-rotor interface and expel heat, gas, dust, and debris from the braking zone.

Wide-aperture slots that actively cool the brake pad. EBC's slot geometry draws air under the pad contact surface, where temperatures can exceed 1,000 degrees Fahrenheit during heavy braking. That airflow reduces heat soak, minimizes brake fade, and promotes even pad wear across the full rotor face.

Dimple-drilled geometry without the cracking risk. EBC pioneered the dimple-drilled rotor concept to allow pad degassing without through-drilling holes that create stress risers and promote rotor cracking. The dimples vent gas that builds between the pad and rotor under high heat, keeping contact consistent and braking feel firm.

Third-generation corrosion protection. Every GD series rotor ships with a silver corrosion-resistant finish that guards the rotor surface and hat between pad changes, so the rotor looks and performs like new even after exposure to rain, road salt, and mud.

Precision machining and strict quality controls. GD series rotors are 100% machined in the United Kingdom from R90-approved blanks, with the majority of castings sourced from EU facilities operating to ISO and BS5750 standards. Before release, every rotor undergoes a 100% runout inspection, metallurgy check, and dimensional verification, plus balancing to ensure safe, vibration-free operation.

Product Benefits

• Rear Fitment: Sized at 350mm for a direct fit on 2021-2026 F-150 2.7L 2WD applications.
• Wide-Aperture Slots: Channel cool air under the pad, reduce heat buildup, and maintain even pad wear.
• Dimple-Drilled Design: Enables pad degassing without the stress risers caused by through-drilled holes.
• Corrosion-Resistant Finish: Third-generation silver coating protects the rotor surface between brake services.
• R90-Approved Blanks: Cast to a recognized European safety standard for rotor materials.
• 100% Pre-Ship Inspection: Every rotor is runout-checked, balanced, and dimensionally verified before leaving the facility.
• Suitable for Fast Street and Towing Duty: GD series targets spirited street drivers and truck owners who push their brakes harder than average.

About EBC Brakes: EBC Brakes is a UK-founded brake specialist with manufacturing and finishing facilities in the United Kingdom and the United States. The brand produces a full range of brake pads, rotors, and brake kits across street, sport, and track applications, and holds quality certifications across its rotor production facilities to ISO and TÜV standards.

WARNING: California Residents: Cancer and Reproductive Harm; www.p65warnings.ca.gov