Stock rotors on the 2000-2001 F-150 4.2L 2WD were sized for everyday commuting, not the heat and stress of heavy braking loads. EBC's GD7155 GD Sport Rotors bring slotted and dimple-drilled performance to the rear axle, pulling heat and debris away from the pad face where temperatures can exceed 1,000 degrees during hard stops.
Wide-aperture slots that actively cool the rotor. The GD series slot geometry draws cool air under the brake pad and rotor interface during braking, reducing pad surface temperatures that cause fade and loss of braking effect. The same slots expel dirt, mud, water, and dust from the contact zone, keeping bite consistent in varied conditions.
Dimple drilling without the cracking risk. EBC developed the dimple-drilled rotor in the 1990s as a safer alternative to through-drilled holes, which concentrate stress at the drill point and promote rotor cracks under repeated thermal cycling. The dimples provide pad degassing benefits without compromising structural integrity across the rotor face.
Corrosion-resistant finish across the full rotor. Third-generation GD rotors carry a silver corrosion protection coating that extends service life, keeps the rotor presentable behind open wheels, and protects against surface rust that can affect initial bite after the vehicle sits.
Manufactured to R90 and ISO standards. GD series rotors are 100% machined in the United Kingdom from R90-approved blanks, with the majority of castings sourced from EU facilities operating under ISO and BS5750 accreditation. Every rotor passes a 100% runout, metallurgy, and dimensional check before release, and all sport rotors are balanced and runout-inspected as a final step.
Product Benefits
- Rear Fitment: Sized and drilled specifically for the 2000-2001 F-150 4.2L 2WD with Wheel ABS, 7-lug configuration.
- Wide-Aperture Slots: Channel cool air to the pad interface and evacuate heat, moisture, and debris during braking.
- Dimple-Drilled Design: Delivers pad degassing without through-holes that promote rotor cracking under thermal stress.
- Corrosion-Resistant Coating: Silver finish protects the rotor surface and maintains consistent initial bite after extended rest periods.
- R90-Approved Blanks: Meets European road-use safety standards for rotor metallurgy and dimensional accuracy.
- 100% Quality Inspection: Every unit passes runout, metallurgy, dimensional, and balance checks before leaving the facility.
- Even Pad Wear: Slot geometry promotes uniform pad contact across the friction surface, extending pad life.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing pads, rotors, and brake kits for street, towing, and performance applications across a wide range of vehicles. Operating facilities in the United States and the United Kingdom, EBC maintains ISO-accredited manufacturing and applies strict in-house quality controls, including 100% dimensional and runout inspection, to every rotor released under the EBC name.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, Lariat, XL, XLT, King Ranch |
| Vehicle Fitment | 2000, 2001, 2002, 2003 |
| FMSI Pad No. | D711 |
