Stock rotors on the 2000-2004 F-150 4.2L 4WD handle everyday driving, but add a loaded trailer, mountain grades, or repeated hard stops and heat becomes the enemy. EBC's GD Sport Rotors give the front axle a genuine thermal management advantage through wide-aperture slots and dimple drilling, keeping pad temperatures in check when the OEM units would be fading.
Wide-aperture slots that actively cool the braking surface. The slot geometry draws cool air under the pad-to-rotor interface, venting heat that can exceed 1,000 degrees Fahrenheit at the heart of the pad during heavy braking. Cooler pads resist fade, maintain consistent bite, and wear more evenly across the full contact patch.
Dimple drilling without the crack risk. EBC developed the dimple-drilled rotor in the 1990s as an alternative to through-drilling. Through-drilled holes relieve gas and debris but create stress risers that can lead to cracking under repeated thermal cycling. Dimple drilling delivers the same pad degassing benefit while preserving the structural integrity of the rotor face.
Third-generation corrosion protection. Every GD Series rotor ships with a silver corrosion-resistant finish that protects the non-swept surfaces from rust and keeps the rotor looking clean on the truck. The finish is not cosmetic gloss; it extends the service life of the hat and vane structure between pad changes.
Machined and inspected to certified standards. EBC GD Series rotors are 100% machined in the United Kingdom from R90-approved blanks, with the majority of castings sourced from ISO and BS5750-accredited EU foundries. Before leaving the facility, every rotor passes a 100% runout check, metallurgy inspection, and dimensional verification, followed by balance and runout confirmation at final release.
Product Benefits
- Front Fitment: Engineered specifically for the front axle of the 2000-2004 F-150 4.2L 4WD 7-lug configuration.
- Wide-Aperture Slots: Channel cool air to the pad-rotor interface and expel dirt, mud, water, and dust from the braking area.
- Dimple-Drilled Design: Provides pad degassing without through-holes that can promote rotor cracking under thermal stress.
- Corrosion-Resistant Finish: Third-generation silver coating protects non-swept rotor surfaces for extended service life.
- R90-Approved Blanks: Cast in ISO and BS5750-certified EU facilities and fully machined in the UK.
- 100% Quality Inspection: Every rotor undergoes runout, metallurgy, dimensional, and balance checks before release.
- Reduced Brake Fade: Active thermal management keeps pad temperatures lower during sustained or heavy braking.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing rotors, pads, and related hardware across a global range of automotive and powersports applications. EBC operates manufacturing and slotting facilities in the United Kingdom and the United States, applying ISO-aligned quality controls and 100% component-level inspection to every product line in the catalog.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, Lariat, XL, XLT, King Ranch |
| Vehicle Fitment | 2000, 2001, 2002, 2003, 2004 |
| FMSI Pad No. | D702 |
