Built for the Boss 302S running a 380mm front disc setup, EBC Racing's SR-21 sintered compound pads deliver race-caliber bite and fade resistance straight from a cold rotor, with no chemical bedding process required before you head to the grid.
Instant bite from cold. SR-21's transfer film technology means the pads are ready to perform from the moment they contact a properly matched rotor. No lapping compound, no burn-in laps, no volatiles to cook off: fit them and race, right up to 925°C (1697°F).
Transfer film technology eliminates rotor wear. Unlike conventional sintered compounds that trade rotor life for friction, SR-21's formulation creates a consistent transfer layer that protects disc surfaces while maintaining aggressive bite. Disc wear is reduced dramatically, and the harder compressibility of the compound sharpens pedal feel and response underfoot.
Wear life that cuts cost per racing mile. Testing shows SR-21 lasting three to five times longer than competing semi-metallic compounds. For a team running a full season, that difference shows up in fewer pad changes, less downtime during events, and lower overall brake spend across the year.
Matched to full race calipers. SR-21 targets front axle positions on race cars equipped with bias bar controls and full race calipers from manufacturers such as AP Racing, Brembo, Alcon, and Wilwood. The DP8084.16SR21 is cut specifically for the 2013-2014 Mustang Boss 302S with the 380mm front disc configuration.
Product Benefits
- No Chemical Bedding: Fit and race immediately; no volatile burn-off stage needed.
- High-Temperature Rated: Consistent friction through ambient conditions up to 925°C (1697°F).
- Transfer Film Protection: Near-elimination of disc wear extends rotor life alongside pad life.
- Improved Pedal Feel: Hard compressibility compound delivers firmer, more responsive pedal feedback.
- Extended Wear Life: Three to five times longer than competitor semi-metallic pads in testing.
- Race Caliper Fitment: Engineered for full race calipers with brake bias controls.
- Manufactured in the USA: Produced at EBC Brakes' American facility.
- Direct Fitment: Front axle application for 2013-2014 Mustang Boss 302S with 380mm discs.
About EBC Racing: EBC Brakes manufactures brake friction compounds across a wide range of performance and motorsport applications, with products developed and validated through active racing programs. The SR sintered race pad line represents EBC's highest-friction, longest-wearing compound tier, targeted exclusively at competitive motorsport use.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Boss 302 |
| Vehicle Fitment | 2013, 2014 |
