Stock sintered pads fade, wear fast, and punish rotors. EBC Racing's SR-11 compound takes a fundamentally different approach, using transfer film technology to bite harder, last longer, and leave rotor wear nearly zero on your 2013-2014 Mustang Boss 302S with the 380mm front disc setup.
Transfer film technology eliminates rotor damage. Most sintered compounds are aggressive on rotors. SR-11 deposits a controlled transfer film onto the disc surface, which actually protects the rotor while maintaining consistent friction. The result is a harder pad in compressibility terms, which translates directly to a firmer, more responsive pedal under race loads.
Cold-bite performance from the first application. After a simple pad-to-rotor match, SR-11 delivers immediate braking response from ambient temperature up to 900 degrees Celsius (1,650 degrees Fahrenheit). There are no chemical volatiles to burn off, so there is no traditional bedding procedure. Fit them and race.
SR-11 targets front axle duty on high-ABS street-base race cars. The medium friction compound suits the front of cars with strong ABS effect or the front and rear of full race configurations with brake bias controls. The compound is also compatible with high-spec race calipers from AP Racing, Brembo, Alcon, and Wilwood.
Wear life that cuts cost per racing mile. Testing shows SR-11 lasts three to five times longer than competitor semi-metallic race pads. Fewer pad changes per season means lower total running costs without any sacrifice in outright stopping power or fade resistance.
Product Benefits
- Direct Fitment: Specifically sized for the 2013-2014 Mustang Boss 302S front axle with 380mm discs.
- SR-11 Medium Friction Compound: Tuned for front axle use on high-ABS cars and full race calipers.
- Transfer Film Technology: Protects rotors while maintaining consistent friction across the full temperature range.
- No Chemical Bedding Required: No volatiles to burn off; install and race immediately.
- Cold-to-Race Temperature Bite: Effective from ambient up to 900 degrees Celsius (1,650 degrees Fahrenheit).
- 3-5x Wear Life: Outlasts semi-metallic competitor pads in back-to-back test data.
- Firm Pedal Feel: Higher compressive hardness delivers a more positive, responsive pedal.
- Made in the USA: Manufactured at EBC Brakes' American production facility.
About EBC Racing: EBC Brakes develops and manufactures brake friction products across street, track, and full-competition applications. The SR sintered compound line is produced at EBC's USA plant and targets serious motorsport competitors who need consistent, high-temperature braking performance without sacrificing rotor life.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Boss 302 |
| Vehicle Fitment | 2013, 2014 |
