Stock brake pads on the Fiesta 1.6L were calibrated for commuter loads and average driving speeds, not the demands of a driver who actually pushes the car. EBC Yellowstuff front pads close that gap with an aramid fiber compound that delivers a 15 percent improvement in brake effect over OEM, with strong cold bite that grows more capable as temperatures climb.
Exceptional cold-to-hot performance range. Yellowstuff grips hard from the first press of the pedal and resists fade through sustained hard driving. The green fade threshold sits at 400 degrees Celsius, covering the full temperature range of fast street use. Progressive pedal feel and a shimmed, slotted, chamfered construction produce smooth, controlled stops rather than the abrupt grab common with lesser performance compounds.
Street-legal and road-ready from the start. These pads carry R90 approval, making them legal for public highway use in European markets and safe everywhere else. A Brake-In coating on each pad accelerates the bedding process so full performance arrives sooner. On the street, natural bedding completes within the first 100 to 200 miles of urban driving.
Built to eliminate common failure points. EBC manufactures Yellowstuff in the UK using Nucap NRS mechanical retention hooks on the backing plate, which mechanically lock the friction material in place and eliminate the risk of pad debond. Super-quiet operation under all conditions means no compromise in daily drivability while gaining a meaningful stopping advantage over OE.
Choosing the right compound matters. Yellowstuff excels on fast street cars, trucks, and SUVs including towing applications and vehicles with oversized wheel and tire packages. For dedicated track days where brake temperatures can exceed 500 to 600 degrees Celsius, EBC recommends Bluestuff, which offers a shorter bed-in time and higher sustained fade resistance. Redstuff is the better pick for drivers prioritizing low dust on the street.
Product Benefits
- 15% Higher Brake Effect: Aramid fiber compound improves stopping power over OEM pads.
- Strong Cold Bite: Grips effectively from the first pedal application without needing a warm-up lap.
- Fade Resistance: Handles the full temperature range of fast street driving up to 400 degrees Celsius.
- R90 Approved: Certified for public highway use in European markets; safe for use globally.
- Brake-In Coating: Factory-applied coating shortens the pad bedding period.
- NRS Mechanical Retention: Nucap hooks on the backing plate prevent pad debond.
- Shimmed, Slotted, and Chamfered: Quiet, vibration-free braking under all driving conditions.
- Progressive Pedal Feel: Consistent modulation with no sudden grab.
- UK Made: Manufactured in EBC's UK facility to tight quality standards.
- Fits 2010-2019 Fiesta 1.6L: Direct front-axle fitment; excludes ST variant.
About EBC Brakes: EBC Brakes is a UK-based manufacturer specializing in friction products for street, performance, and motorsport applications. The company produces brake pads and rotors across a range of compounds to match specific driving demands, from daily commuting to hillclimb and drift competition.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | S, SE, Titanium |
| Vehicle Fitment | 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 |
| FMSI Pad No. | D1454 |
