EBC Redstuff front pads for the 2013-2014 Mustang V6 3.7L with the Automatic Transmission and Performance Package solve both dust and stopping distance problems simultaneously, cutting dust by 50 percent and improving brake effect by 15 percent compared to factory compounds.
Aramid fiber ceramic compound with real stopping credentials. Redstuff uses an aramid fiber base enhanced with ceramic particles, a combination that bites hard from cold and builds performance as temperatures rise. Witnessed testing at the UK Motor Industry Research Association recorded a reduction in stopping distance of nearly 50 feet from 100 mph, representing a 30 percent brake improvement over OEM pads.
The lowest-dust performance pad EBC produces. The ceramic compound contains no steel fiber particles, so the minimal dust that does accumulate wipes off with a sponge. Wheels stay cleaner between washes, and brake dust pitting on alloy surfaces is drastically reduced. Nominal friction coefficient sits at 0.5 with approximately 50 percent dust reduction versus semi-metallic alternatives.
Brake-In surface coating eliminates the bedding guesswork. Every set ships with EBC's red Brake-In coating pre-applied to the friction surface. The coating conditions the rotor surface on contact and accelerates pad seating, so the pads provide safe, predictable braking immediately after installation. Because Redstuff is a hard-wearing compound, full bed-in can take up to 1,000 miles; consistent performance continues to build across that period rather than dropping off.
Hardware engineered to last as long as the compound. Nucap NRS mechanical hooks on the backing plate lock the friction material to the steel, eliminating any possibility of pad delamination under repeated heavy braking loads. ECE R90 brake safety approval applies to most fitments in this line.
Product Benefits
- 15% Brake Improvement: Higher friction formula shortens stopping distances compared to OEM pads.
- 50-90% Dust Reduction: Ceramic compound produces dramatically less wheel contamination than semi-metallic pads.
- Aramid Fiber Ceramic Compound: Hard-wearing material handles repeated heavy braking without fade or fall-off.
- Cold-Bite Performance: Grips as well as OEM pads from cold and improves as heat builds.
- EBC Brake-In Coating: Pre-applied red surface layer conditions rotors and accelerates bed-in from first use.
- NRS Mechanical Hooks: Nucap backing plate hooks bond friction material to steel, preventing delamination.
- ECE R90 Approved: Meets European brake safety regulation standards on most applicable fitments.
- Correct Fitment: Front axle application specific to 2013-2014 Mustang V6 3.7L with A/T and Performance Package.
About EBC Brakes: EBC Brakes manufactures a full range of brake pads, rotors, and brake lines from facilities in the United Kingdom and the United States. The company tests compounds at recognized automotive research facilities, including the Motor Industry Research Association, and holds ECE R90 approval across the majority of its passenger car pad range.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | GT, Boss 302 |
| Vehicle Fitment | 2010, 2011, 2012, 2013, 2014 |
| FMSI Pad No. | D1463 |
