Stock brake pads on the Fiesta ST 1.6 Turbo prioritize longevity and low noise over confidence-inspiring pedal feel. EBC Greenstuff DP22149 front pads deliver a higher initial bite from the first pedal press, cutting stopping distances by a nominal 10 to 15 percent while keeping dust levels manageable for daily driving.
High initial bite without the track-only compromise. The Greenstuff 2000 compound carries a nominal friction coefficient of 0.55, giving the Fiesta ST driver a confident, progressive pedal that outperforms the factory pad without demanding the heat cycles that race compounds require. Improved resistance to heat fade at higher speeds keeps braking consistent whether you are pushing through canyon roads or commuting in traffic.
Ready to work from the moment they go on. A red brake-in surface coating pre-conditions the pad face so the brakes are immediately safe and effective after installation. There is no extended cold-bedding ritual required before the pads reach usable friction levels, which matters on a daily-driven Fiesta ST.
Built clean and built to stay bonded. EBC formulated Greenstuff 2000 without lead, copper, or toxic sulfides, meeting current environmental legislation and ECE R90 highway approval. Nucap NRS hook technology mechanically bonds the friction material to the backing plate, eliminating any risk of delamination under repeated hard stops.
A note on dust. No brake pad is truly dust-free; friction generates dust by nature. Greenstuff produces less dust than most performance compounds, and what dust it does generate washes off the wheel face more easily. Drivers who want even lower dust on a heavier or faster car may prefer EBC Redstuff.
Product Benefits
- High Initial Bite: Nominal friction coefficient of 0.55 delivers confident braking from the first pedal application.
- 10-15% Stopping Improvement: Nominal reduction in stopping distances over stock pads.
- Heat Fade Resistance: Improved compound stability at higher speeds versus OEM material.
- Red Brake-In Coating: Pre-conditioned surface delivers safe, effective braking immediately after install.
- ECE R90 Approved: Certified for highway use on vehicles subject to European brake safety legislation.
- Eco-Friendly Formula: Contains no lead, copper, or toxic sulfides.
- Nucap NRS Technology: Mechanical hook system bonds friction material to the backing plate for a 100% secure pad bond.
- Direct Replacement: Drops into factory front caliper locations on the 2013-2019 Fiesta ST 1.6 Turbo with no modifications.
About EBC Brakes: EBC Brakes is a dedicated brake component manufacturer producing pads, rotors, and brake lines across a wide spectrum of compounds, from street-oriented Greenstuff and Redstuff grades through to race-focused Bluestuff, RP, and SR series materials. Each compound targets a specific combination of friction level, operating temperature, and dust output so drivers can match the pad to their actual use case.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | ST |
| Vehicle Fitment | 2014, 2015, 2016, 2017, 2018, 2019 |
| FMSI Pad No. | D1730 |
