Stock brake pads prioritize low cost and quiet operation over feel and stopping power. EBC's Greenstuff 2000 Series compound changes that equation for street-driven vehicles, delivering a noticeably higher initial bite and a more confident pedal from the very first press.
Higher bite from the first pedal application. The Greenstuff compound carries a nominal friction coefficient of 0.55, which translates to roughly 10-15% improved stopping distances compared to OEM pads. Improved heat fade resistance at higher speeds keeps that performance consistent during spirited driving on public roads.
Environmentally compliant and road-legal. The Greenstuff 2000 formulation contains no lead, copper, or toxic sulfides, meeting current environmental legislation. ECE R90 approval confirms the compound meets European brake safety standards for highway use, making it a compliant direct replacement across a wide range of Euro and Asian platforms.
Nucap NRS hook technology holds the compound in place. Rather than relying solely on adhesive bonding, Nucap NRS mechanically locks the friction material to the backing plate, eliminating the risk of delamination under repeated heavy use.
Ready to work immediately after installation. A red brake-in surface coating pre-conditions the pad face, so the compound seats against the rotor faster than a raw pad surface would. Safe, effective braking begins right from the first drive rather than requiring an extended bedding procedure under controlled conditions.
Reduced dust, and what dust remains washes off cleanly. No brake pad is completely dust-free, but Greenstuff generates less dust than most OEM compounds, and the residue that does accumulate rinses away without staining wheels the way some performance compounds do.
Product Benefits
- Greenstuff 2000 Compound: Nominal 0.55 friction coefficient delivers 10-15% stopping improvement over stock pads.
- High Initial Bite: Strong, confident pedal feel from the very first brake application.
- ECE R90 Approved: Certified for highway use under European brake safety legislation.
- Eco-Friendly Formula: No lead, copper, or toxic sulfides in the friction material.
- Nucap NRS Technology: Mechanical hook bond locks friction material to the backing plate for a secure, lasting pad-to-plate connection.
- Red Brake-In Coating: Pre-applied surface layer accelerates bedding and enables safe braking immediately after installation.
- Improved Heat Fade Resistance: Maintains consistent stopping power during higher-speed street driving.
- Lower Dust Output: Less wheel contamination than most OEM compounds, and residue rinses off easily.
- Direct Replacement Fit: Bolts into the factory caliper location without modification.
About EBC Brakes: EBC Brakes manufactures friction products for street, track, and competition applications across motorcycle, automotive, and light truck platforms. Their compound lineup spans daily-driver grades through full race formulations, allowing drivers to match the pad to their specific use case rather than settling for a one-size-fits-all solution.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Fitment | 2006, 2007, 2008, 2009, 2010, 2011, 2012 |
| FMSI Pad No. | D1161 |
