Stock cast-iron rotors shed heat slowly and trap gas between the pad and rotor face, accelerating fade under hard braking. EBC's BSD7502 front rotors replace that limitation with a precision-machined G3000 grey iron disc built to evacuate heat fast and keep pad temps in check on the 2009 F-150 4.6L 2WD with a 6-lug configuration.
Blade slot geometry sets these apart from conventional slotted rotors. Where a uni-directional slot vents gases in a single path, EBC's bi-directional blade slot pattern overlaps to pull hot gases away from the braking zone more efficiently. Pads stay flatter, contact remains consistent, and brake fade takes longer to arrive under repeated hard stops.
Quieter than most performance rotors. The overlapping slot geometry dampens the wind noise that plagues conventional slotted discs. Drivers get the gas-evacuation benefit of a slotted rotor without the whistle that makes performance hardware difficult to live with on daily-driven trucks.
Manufactured to tight tolerances at EBC's Northampton, UK facility. Each disc starts as a GS3000 grey iron casting blank, then goes through precision machining, flat grinding, metallurgy inspection, balancing, and corrosion-resistant finishing before leaving the plant. Heat treatment is applied to the G3000 iron for added durability and a smoother braking feel from the first stop.
Compatible with EBC's full pad lineup. These rotors pair with EBC Greenstuff, Redstuff, Yellowstuff, or Bluestuff NDX brake pads, covering street performance through track-day use depending on the application.
Product Benefits
- G3000 Grey Iron Construction: Heat-treated casting delivers durability and consistent pad bite across the full operating range.
- Bi-Directional Blade Slots: Evacuate hot gases from the braking zone faster than uni-directional slot designs.
- Cooler Pad Temperatures: Reduced heat transfer keeps pads flatter and extends pad life.
- Reduced Wind Noise: Overlapping slot geometry minimizes rotor whistle on daily-driven vehicles.
- Precision Balanced: Flat-ground and balanced at the EBC UK plant to eliminate vibration and pedal pulsation.
- Corrosion-Resistant Finish: Applied at the factory to protect rotor surfaces before installation.
- Direct Fitment: Front application, confirmed for 2009 F-150 4.6L 2WD 6-lug.
About EBC Brakes: EBC Brakes manufactures brake pads and rotors at its Northampton, UK facility, supplying performance and OEM-replacement friction products for a wide range of street, tow, and track applications. Every rotor in the BSD lineup undergoes in-house metallurgy checks and precision balancing before shipment.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | FX4, King Ranch, Lariat, Platinum, STX |
| Vehicle Fitment | 2009 |
| FMSI Pad No. | D1392 |
