Forged construction at 20.8 pounds in a 19x11 ET26 fitment covers a wide stretch of Mustang generations, from the 2005 S197 through the current S650, without sacrificing the structural integrity that track and street abuse demands.
Sprint Line forged construction. The VS-5RS belongs to APEX's Sprint Line family, where the forging process aligns the grain structure of the aluminum for a stronger, lighter wheel than cast alternatives. At 20.8 lbs for a 19x11, the VS-5RS keeps unsprung mass in check, which translates directly to sharper turn-in response and improved ride quality over bumps.
ET26 offset tuned for the Mustang platform. The 26mm positive offset positions the wheel correctly within the factory fender envelope across 2005-2026 model years, giving you proper scrub radius geometry without rubbing on struts or inner fenders. Running an 11-inch-wide wheel at this offset fills the rear quarter aggressively while maintaining safe clearances.
Satin black finish suits a range of build styles. The non-gloss satin black surface resists brake dust adhesion better than polished or gloss finishes and hides minor surface contamination between wash cycles. The five-spoke RS design keeps brake cooling airflow moving through the face of the wheel toward rotors and calipers.
Product Benefits
- Forged Construction: Higher strength-to-weight ratio versus cast wheels at the same diameter and width.
- 20.8 lb Weight: Reduces unsprung and rotational mass for improved acceleration, braking, and handling response.
- 19x11 ET26 Fitment: Sized and offset specifically to fill the Mustang wheel well correctly across 2005-2026 model years.
- Sprint Line Family: APEX's performance-focused forged lineup engineered for enthusiast street and track use.
- Satin Black Finish: Low-maintenance surface that resists brake dust adhesion and minor surface soiling.
- Five-Spoke RS Design: Open face promotes airflow to brakes while keeping structural rigidity high.
- Broad Generation Compatibility: Fits S197, S550, and S650 Mustang platforms in a single part number.
About APEX Wheels: APEX Wheels focuses exclusively on flow-formed and forged aluminum wheels engineered for enthusiast driving on both street and track. Every APEX wheel is developed with specific fitment data for the platforms it targets, with an emphasis on weight, strength, and brake clearance.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 1 Hour
- Vehicle Fitment:
- 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
