Forged from a single billet, the APEX VS-5RS delivers a race-proven five-spoke design at 20.3 lbs in an 18x11.5 ET50 fitment that suits the 2005-2026 Mustang platform from S197 through S650.
Sprint Line forged construction. APEX's Sprint Line wheels start as a solid forged blank, which compresses the grain structure of the alloy and produces a wheel that carries less mass than a comparable cast unit. At 20.3 lbs for an 18x11.5, the VS-5RS reduces unsprung and rotational weight simultaneously, sharpening steering response and easing the load on brakes and suspension components.
18x11.5 ET50 sizing for rear fitment. The 11.5-inch width and ET50 offset place the wheel face flush with the fender line on Mustang rear axles, providing clearance for wide rear tires without compromising the look of the quarter panel. This sizing supports aggressive tire stretching for track use or a staggered street setup.
Brushed Clear finish. The brushed clear coat preserves the natural texture of the forged aluminum face while protecting it from brake dust, road debris, and wash chemicals. Maintenance requires nothing more than soap and water, and the finish does not hide the machined spoke detail that defines the VS-5RS profile.
VS-5RS spoke geometry. The five-spoke layout balances torsional stiffness with weight savings, keeping spoke cross-sections lean without sacrificing the structural rigidity demanded by road-course and autocross loads. The open face design also improves brake cooling airflow past the rotor hat.
Product Benefits
- Forged Construction: Single-billet forging produces a stronger, lighter wheel than cast alternatives.
- 20.3 lb Weight: Low mass reduces unsprung weight and rotational inertia on all four corners.
- 18x11.5 ET50: Rear-biased sizing supports wide tire fitments on 2005-2026 Mustang platforms.
- Brushed Clear Finish: Factory-applied clear coat protects the brushed face and simplifies cleaning.
- Sprint Line Pedigree: Part of APEX's purpose-built performance wheel family, validated for track use.
- Broad Fitment Range: Covers S197, S550, and S650 Mustang generations in a single SKU.
- Open Face Design: Promotes airflow to brake components during sustained high-load driving.
About APEX Wheels: APEX Wheels specializes in forged and flow-formed aluminum wheels engineered specifically for performance driving. The company develops each wheel around real track-use demands, balancing minimum weight against structural integrity, and validates fitments across the Ford Mustang platform and other enthusiast vehicles.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 1 Hour
- Vehicle Fitment:
- 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
