Forged from a single billet, the APEX VS-5RS delivers race-proven stiffness and a weight figure that stock cast wheels cannot touch, making it a serious choice for Mustang owners who push their cars on track and want hardware that keeps up.
Forged construction at 20.3 lbs. The VS-5RS comes in at 20.3 lbs in this 18x11.5 ET50 fitment, a result of the forging process that densifies the aluminum and allows engineers to remove material where it is not needed. Less unsprung weight translates directly into sharper turn-in, better suspension compliance, and reduced rotational inertia under acceleration and braking.
Sprint Line engineering. The VS-5RS sits within APEX's Sprint Line family, which targets track-day and time-attack use. The five-spoke RS design balances torsional rigidity with brake cooling airflow, keeping rotor and caliper temperatures in check during hard lap sessions.
18x11.5 ET50 fitment for 2005-2026 Mustangs. The 18-inch diameter pairs with an 11.5-inch width to accommodate wide rear tires, and the ET50 offset places the wheel correctly within the S197 and S550 rear wheel wells without requiring spacers or fender modifications on supported applications.
Anthracite finish. The anthracite coating provides a dark, low-glare appearance that reads as purposeful rather than decorative, holding up to brake dust and track grime without demanding constant attention.
Product Benefits
- Forged Construction: Single-billet forging produces a stiffer, stronger wheel than cast alternatives at a lower weight.
- 20.3 lb Weight: Reduced unsprung and rotational mass improves handling response and acceleration.
- 18x11.5 ET50: Wide rear fitment supports large contact patches for maximum traction on track.
- 2005-2026 Mustang Fitment: Covers S197 and S550 platforms in one confirmed application range.
- Sprint Line Family: Engineered specifically for performance driving, not street-only cruising.
- Anthracite Finish: Durable dark coating resists brake dust and track debris.
- Five-Spoke RS Design: Spoke geometry promotes brake cooling airflow during sustained hard use.
About APEX Wheels: APEX Wheels focuses exclusively on track-capable forged wheels for performance and sports cars, engineering each design around real-world motorsport demands. The Sprint Line represents the core of the APEX catalog, developed with input from time-attack competitors and road-course regulars who measure performance in lap times.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Tech Recommended
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 1 Hour
- Vehicle Fitment:
- 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
