Steeda Ford Fusion Cold Air Intake (06-12) 3.0L V6

Steeda Ford Fusion Cold Air Intake (06-12) 3.0L V6
555 3128
$279.95
$320.95
$41.00(13%)

Choose Options

Replacement Cone Filter
No Thanks
Blue Filter [+$54.95]
Red Filter [+$54.95]
Air Filter Cleaning Kit
No Thanks
Steeda Air Filter Cleaning Kit - Blue Oil [+$19.95]
Precision Air Filter Cleaning Kit - Blue Oil [+$29.95]
Precision Air Filter Cleaning Kit - Red Oil [+$29.95]

Product Install Instructions

Gain horsepower and torque easily with this easy to install upgrade. Lifetime filter can be cleaned and re-oiled but the big news here is that we've designed this intake kit to work by itself or with our SCT custom tunes. Our design provides a cool air charge safely without risking engine damage from water or foreign object ingestion. Other air intakes relocate your filter to the bottom of your fender well or engine compartment. Not only can this allow water into your engine under rainy conditions but it turns your cold air intake into a vacuum while driving sucking up dirt and debris from the road.

The kit is supplied with a stainless steel air box with built-in velocity stack and CNC billet aluminum mass air meter housing. It mounts in the factory location as is supplied with rubber trim. Our tests showed inlet temps a mere 5 to 10 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled making maintenance a snap. All stainless steel hardware required for installation is included in the kit.

Used without a tune we have seen up to 12 horsepower. We've found between 25 and 31 horsepower and over 25 foot pounds of torque with this kit and SCT tune. Steeda dealers such as Tasca Ford have seen 40 horsepower at the wheels with our cold air tuner and Magnaflow cat-back exhaust system!

Product Benefits

  • Does not get heat soaked like factory air box
  • Cools to ambient temperature range significantly faster than the stock unit while producing more power
  • Lifetime Warranty - Backed by a trusted company that has been in business for over 20 years
  • Built in Velocity stack compresses and straightens incoming air eliminating turbulence across the MAF for greater gains than just having larger MAF housing and better throttle response.
  • Included heat shield isolates air entering the filter from engine bay air reducing air inlet temperatures resulting in better power. Unshielded kits lose power in real world conditions due to reduced air charge density and timing reduction by the computer due to increased temperature. No Shield = HUGE performance losses in real world conditions.
  • Securely mounted to vehicle - Will not vibrate bend or cause damage like unmounted systems
  • Huge DOCUMENTED REAL WORLD horsepower and torque gains
  • Made by the highest standards available
  • Made with highest quality materials available on the market
  • Increased gas mileage
  • Smooths out incoming air for more horsepower and torque
  • Easy install
  • Steeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!

Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.

Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.


MPN: 555-3128
Amazing CAI
I have a 2010 Mercury Milan and installed this intake not too long ago. The product is great! I love the looks, and the power/torque gains. The install was a breeze, however the rubber edging you have to put on didnt seem to hold up to well through instalation. But other than thats it looks, performs, and sounds great! Adds a nice gurthy tone and improves TR. Buy It!!!!
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Florida. on 7/26/2012
5/5
AWESOME!
If your thinking, dont just like the other guy said. This is THE BEST $250 I've ever spent on ANY CAR accessory! CUSTOMER SERIVE IS THE BEST IVE EVER HAD. Rings one time then an answer from a live rep. Don't hesitate
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Louisiana . on 4/6/2013
5/5
Definitely worth it
I got my Fusion back in February '12, and after over a year of research, I decided Steeda was the best option for aftermarket 'bolt-on' performance. Just received my CAI and strut tower brace today, installation was a breeze, even for a mechanically challenged person such as myself (took less than a half hour to get both installed and ready to rip). I've tacked on about 100 miles today tooling around and seeing if the $350 bucks I just dropped was worth it. It most definitely is. CAI- LOVE the throaty note coming from the engine compartment, great improvement in throttle response, and there is a noticeable improvement in acceleration. This being with the restrictor sleeve still in place, as I haven't gone with the SCT tune yet (that's next on the agenda). Strut Tower Brace - BEST 'BANG FOR THE BUCK' part I've ever purchased. Steering is much more stable (no more 'slop'), vibration is practically eliminated, corners are a breeze at 10 mph higher than I was taking them before the brace, and it seems to have helped reduce wheelspin at WOT takeoff. Customer service was fantastic as well, and the free shipping was great, ordered the parts on Monday afternoon, they were at my door (metro Detroit) Thursday morning. All said, if you're debating on getting these upgrades, or anything from Steeda, don't wait a year like I did. Go for it. It's definitely worth it.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Florida. on 3/7/2013
5/5
Great intake
Great intake. I put this on my 2012 Fusion and it looks, sounds, and feels very nice. You can feel a slight increase in throttle response. The sound is also greatly enhanced at higher RPMs. If you're on the fence about putting it in your car, like I was, just get it.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Georgia. on 5/11/2014
5/5
Very impressed
Just installed mine today. Very impressed. Installed on my 2012 SEL. The sound is out of this world very deep at high RPM. The install was very easy other then the black rubber piece that goes around it. All so i had to pick up a new hose clamp as the ford factory one is a once time use one. No big deal at 3 bucks. If your only going to pick one mod this would be the one. Cant wait to order my next part from Steeda.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Florida. on 2/23/2015
5/5
Nice product
Installed this on my 2008 Fusion SE V6 AWD. As a guy who usually breaks things when he tries to fix them - this was a pretty easy job. I put the air intake together inside before I went outside to take the old filter out. The directions were a little incorrect however. First, they said there was a bolt holding the old housing in place. Couldn't find it. It turned out there was just a rubber grommet holding it in place. A nice steady pull and it came out. Second, the instructions call for the use of a size 20 Torx screwdriver to reinstall the air flow meter. I tried - a size 20 Torx screwdriver is too big. I used a hex head allen wrench/key which did the trick. After install, I feel an improvement in throttle response. The sound is great as well. A nice growl during hard acceleration, but none at all while cruising. Nice product - would recommend.
Did you find this helpful? 
Reviewed by:  from Georgia. on 2/27/2012
5/5
Easy installation
This CAI only took me about 30-40 minutes to install and I've never installed one before. Even if you don't notice a performance difference it still sounds great especially at higher RPMs. My gas mileage seems to have improved slightly (1-2mpg) and IMHO my car has a little more jump off the line, but I have not had any tuning or testing done to show numerical results. Either way, worth the price!
Did you find this helpful? 
Reviewed by:  from California. on 10/17/2013
5/5
DO IT!
I'm new to the performance scene, but I chose the CIA as my first upgrade to my 06 Fusion. All I can say is if you are considering this upgrade, DO IT! You won't be disappointed.
Did you find this helpful? 
Reviewed by:  from Florida. on 2/3/2014
5/5
Great product!
I purchased this right after I got my 2011 Sport. This was a simple install that took no more than 45 minutes. If makes a mean sound under the hood and performance gains can be felt!
Did you find this helpful? 
Reviewed by:  from Georgia. on 3/13/2014
5/5
There are no reviews for this product!

Related Items

More races are won...more track records are set...and more championships are captured with vehicles using Steeda performance parts than any other brand.

Steeda, the world's largest aftermarket manufacturer of Ford performance equipment, is the leader in parts and upgrades for Mustang, Fusion, Fiesta, Focus vehicles, F-150 trucks and more. With over 4,000 items, including Steeda Manufactured Suspension/Chassis components, Induction/Cold Air Intakes and Shifters, Steeda.com is your one-stop for performance parts, accessories, modifications and tuning.

Our performance parts and accessories are built by true performance enthusiasts who are dedicated to the craft they love. Steeda is the culmination of over 28 continuous years of racing history, product innovation and continuous automotive refinement driven by a passion for performance and a love for great design. At Steeda, we share a wealth of our motorsports expertise and ISO 9001:2008 Certified processes in the design, engineering, and manufacturing of our performance parts to bring a completely new level of performance and excitement to every vehicle equipped with our parts. Parts are manufactured at our Steeda Valdosta Georgia complex, home to most modern and up-to-date aftermarket facility in the world.

Speed Matters®

Steeda is an ISO 9001:2008 Certified Global Manufacturer Copyright 1988-2017 Steeda Sales & Services, LLC - All Rights Reserved Worldwide.
Unauthorized duplication or copying is strictly prohibited.
Steeda is an A+ Better Business Bureau certified Business.

Ford, Ford Mustang, Ford F-150, F-150, F150 Raptor, Raptor, Mustang GT, SVT Cobra, Cobra, Ford Lightning, Supercrew, Supercab, Power Stroke, Triton V8, Mach 1 Mustang, Shelby GT 500, GT350, GT350R, Cobra R, Bullitt Mustang, SN95, S197, S550, New Edge, V6 Mustang, Fox Body Mustang, EcoBoost, 5.0 Mustang, Ford, Ford, Ford Fusion, Ford Fusion Sport, Ford Focus, Focus, RS, S, SE, SEL, SES, ST, Duratec, Titanium, Electric, ZX3, ZX4, ZX5, ZXW, SVT, LX, ZTS, ZTW, 2.0L EcoBoost, 2.3L EcoBoost Ford Fiesta, Fiesta, S, SE, ST, Titanium, Duratec, 1.6 EcoBoost, Duratorq, Ti-VCT are registered trademarks of Ford Motor Company. Steeda Sales & Service, LLC has no affiliation with the Ford Motor Company. Throughout our website and catalog these terms are used for identification purposes only.

Top