Cyber Monday: Save 10% Sitewide*

Steeda Mustang Coupe Full-Length Jacking Rails (2015-2021)

30 Review(s)
$30.05 (16%)
Steeda full length Ultra-Lite Low-Profile Chassis Jacking Rails for your 2015+ S550 Mustang are made in USA from the best steel tubing and powder coated for a lifetime of service.
Cyber Monday: Save 10% Sitewide, Use Code: CYBER10
Part Number: 555 5212
If Anderson Composites product is delivered defective or damaged, you must notify Steeda within 24 hours of delivery.

By checking this box, I accept these terms *

Write a Review

Suggested Mods


The team at Steeda was asked to come up with a full-length version of our incredibly popular Ultra-Lite Low-Profile Chassis Jacking Rails for your 2015+ S550 Mustang Fastback and we delivered! Made from the best steel tubing we have used to keep Fox Mustangs from flexing for 25+ years, Steeda's new Full-Length, Ultra-Lite, Low-Profile Chassis Jacking Rails are CAD-designed to exact specifications for impeccable fitment. The full-length design has more surface area for jacks and jack stands which help make installing your other Steeda parts a breeze!

Powdercoated wrinkle black for a low key, yet durable finish, these will last a lifetime under your S550 Mustang. Steeda also includes all of the necessary hardware for a simple bolt-in design that can be removed at any time. And best of all, these still work with Steeda's IRS Subframe Support Braces without interference! Steeda's new Full-Length, Ultra-Lite, Low-Profile Chassis Jacking Rails add convenience and function to your S550 Mustang.

Note: Fits 2015+ Mustang GT, EcoBoost, or GT350 Fastback coupe models only. Convertible cars require Steeda 555 5207 sold HERE .

Also fits the S550 GT500

Product Benefits:
  • 25% lighter than the competition, only 11.6 lbs!
  • Allows you to jack up your S550 anywhere along the jacking rail, preventing damage to your factory pinch welds
  • Will work with Steeda's popular IRS Subframe Support Braces
  • Powdercoated for a sleek and durable finish
  • Full-length design for greater stability and additional jacking point options
  • Includes all necessary mounting hardware
  • Provides extra room for jacks and stands
  • Lifetime warranty
  • Made in the USA using high-grade materials

Steeda S550 Jacking Rails Micrographic

CA Residents: Cancer and Reproductive Harm WARNING

Hi everybody Brian from here today to talk to you about S550 Ultra Low-profile Jacking Rails. These are full-length jacking rails to install underneath your car which will make it raising it to do project service anything that you're starting to do to your car a breeze. Now the whole idea of the low profile is that these sit right along the pinch bolts just inside, underneath your car. They're designed to be easily accessible and provide a little bit of protection for those of you that have your cars very low. More importantly for those of you taking your car to the track or doing service after the track you can use the full length of the jacking rail to use your jack to raise the car and/or your jack stands to safely work under your car. Now like all Steeda products we really think through everything about this sleek design ultra low profile. These are 25% lighter than any other jack and rails on the market. That's really important for those of you again adding components to your car for performance. Another great aspect to our jacking rails is they work in conjunction with our subframe braces, so there's no interference they will work with one another. Since we know these are going to get a lot of views we've powder-coated them and a durable black finish so you know they're gonna last you a very long time. We still recommend using pads on your jack stands to keep these nice-looking jacking rails in good shape and keep the underneath of your car looking clean. Not that you see it that often, but let's be honest every one of us takes a look when we're under the car. The jacking rails come with all the necessary hardware for mounting including the mounting bolts and the finishing caps, again a nice touch that we put on this kit. Thank you for watching. If you have any questions go ahead and post them below. Please don't forget to subscribe and follow us on social media to learn the latest products that we offer for the Mustang, Fusion, Focus and more. Have a great day!
View Full Transcript

Fitment & Features


Manufacturer: Steeda Autosports

Installation Information:

Level of Difficulty: Easy
Install Time: About 15 Minutes
Tools Required: Basic Shop Tools
Print Instructions: Installation Instructions

Vehicle Fitment:

Fits Model Year: 2015, 2016, 2017, 2018, 2019, 2020, 2021

Customer Reviews

Rating Snapshot

Select a row below to filter reviews.


Average Customer Ratings


Quality product
High quality product and easy install. Makes getting on Jack stands much easier.
Did you find this helpful? 
from Sanford, NC on 11/7/2021
Great quality
Great quality, price and customer service from Steeda! The best!
Did you find this helpful? 
Verified Buyer   from Puerto Rico on 10/11/2021
Jacking rails
Fit great, a must have for easy lifting on the S550
Did you find this helpful? 
from Sparta on 8/12/2021
GREAT Product!!
The Jacking Rails fit perfectly, were easy to install, and worked just as advertised. They make simply maintenance such as, oil/filter changes and tire rotations, a breeze!! I would recommend these to anyone. Additionally, the Jacking Rail workmanship and powder coating were excellent.
Did you find this helpful? 
from Texas on 8/10/2021
Jacking rails
Easy to install with great fitment. Makes jacking up my car a breeze!
Did you find this helpful?  1 of 1 Found Helpful
from Cape Coral on 5/18/2021
Stang owner
Awesome first mod.
Did you find this helpful? 
from East Northport on 4/18/2021
Great peace of mind
These rails make me sleep better at night knowing that in the odd event that someone else is jacking up my brand new car, my pinch welds will live to see another day. Not to mention they are insanely lightweight and look great in their wrinkle black finish. Install took 20 minutes of awkwardly reaching under the car as you really don't even need to put the car on ramps or jack stands to access the bolts. **TIP: Do not be concerned if the rubber hole covers/plugs you receive look like they've been bent and malformed to oblivion. I initially was worried that they'd be unusable, but the minute you go to push them into the holes, they pop right in and look PERFECTLY flush. 10/10 recommend for peace of mind and ease of being able to jack up the car from anywhere along the rails!
Did you find this helpful?  3 of 3 Found Helpful
from Virginia, USA on 3/18/2021
jacking rails
work as advertised but had to lengthen one of the holes to get it to line up properly, but overall happy
Did you find this helpful?  2 of 2 Found Helpful
from Rock Hill on 1/26/2021
Jacking rails for 2020 Mustang GT
Excellent product overall. They fit and look great plus they perform as expected. Good value as well vs other competitors. The rubber caps are a great bonus and make the product look finished.
Did you find this helpful? 
from Coppell, TX on 1/4/2021
Great fit and finish!!
Rails were super easy install and fit and finish was STEEDA quality as usual
Did you find this helpful? 
from Ohio on 12/11/2020
Jacking Rails
Product is built well and fits great! Makes jacking the car up a lot easier and more quickly.
Did you find this helpful? 
from Pittsburgh, PA on 11/4/2020
Love these! Can't even tell you have them installed. Can't wait to add the K-brace and IRS Brace to link it all together. Thank you STEEDA for the quick shipping.
Did you find this helpful?  1 of 1 Found Helpful
Verified Buyer   from Austin TX on 10/20/2020
Great mod for safely lifting the vehicle
These full length jacking rails worked perfectly for jacking up my car to do suspension, Trans and engine mods. They remind me of subframe connectors used on older model Mustangs
Did you find this helpful?  1 of 1 Found Helpful
from Kansas on 9/14/2020
Jack rails
Excellent product and support (for a question I had)
Did you find this helpful?  1 of 1 Found Helpful
from New Jersey on 9/14/2020
Must have
Ordered these for my 2020 Ford Mustang Bullitt. They arrived quickly and well packaged. They fit perfect and I have already used them, did exactly what they are supposed to do. Makes putting the car on jack stands much easier. Only complaint is they should of came with directions although it is easy to figure out.
Did you find this helpful?  3 of 3 Found Helpful
from RALEIGH on 7/9/2020
Can't beat the quality for the price. Makes working on the s550 easy
Did you find this helpful?  1 of 1 Found Helpful
from Sc on 7/8/2020
Money well spent
Got to have these rails if you do any work or maintenance on your Mustang they make jacking up your car a breeze and i think they would probably protect it from scrapping if you got it lowered.
Did you find this helpful?  2 of 2 Found Helpful
Verified Buyer   from TORRANCE on 4/23/2020
Must have part
Super insignificant weight, extremely simple installation, and makes lifting the car nearly thoughtless. Now instead of performing some type of mechanic break-dancing for a few hours to carefully lift the car and place on jack stands, you can simply lift from closer to middle of the side of the car, lift the entire side up then throw your jack stands at the ends of the rail. Plus now all the wear and tear of lifting if your jack pad isn't the most gentile is on a replaceable part.
Did you find this helpful?  3 of 3 Found Helpful
Verified Buyer   from Vermilion on 3/27/2020
Great item
I needed the jacking rails for my Shelby GT350 safely off the ground and to provide a convenient jacking point. The STEEDA rails provided exactly what I needed.
Did you find this helpful?  2 of 2 Found Helpful
Verified Buyer   from Goldsboro, NC on 2/27/2020
555 5212 Steeda S550 Mustang Low-Profile Chassis Jacking Rails (2015-2020 Coupe)
I'm Completely satisfied with this produce and how well made they are! I would recommend these if you want a great product at an awesome price!
Did you find this helpful?  1 of 1 Found Helpful
Verified Buyer   from TN on 1/16/2020
Protect your pinch points
Much needed accessory for lifting your mustang
Did you find this helpful?  1 of 1 Found Helpful
Verified Buyer   from New Jersey on 1/12/2020
Must have mod!
This is my second must have mod from Steeda, I did the hood struts first, now the rails. Makes jacking up my 2019 GT Premium a snap! I can put the jack or the stands anywhere along the rail and no more worries about the pinch weld. I went with the full length rails just to have more choices for jack stand placement. Installation is easy, I did put the car on ramps, I've seen the videos of guys doing it flat on the ground by feel or with mirrors... no thanks! I did scrape off the seam sealer at the front mounting area, but just enough to get the rail to butt up against the body, the edge of the frame joint is still sealed. I also used the three factory bolts per side for the install, as well as one of the Steeda supplied bolts. You could use all the Steeda bolts and it would be just fine. I just prefer the longer factory bolts. If you have a S550 mustang you need these!
Did you find this helpful?  10 of 10 Found Helpful
Verified Buyer   from TN on 12/17/2019
Nice part
Jacking rails fit well and I expect them to work well for a long time. Install was pretty basic, even on the ground. Feel far more confident jacking from the sides and not damaging the pinch welds. Far better placement of jack stands with these in place.
Did you find this helpful? 
Verified Buyer   from Iowa on 9/30/2019
Installed these to make jacking the car easier! They do that. Fit and finish, perfect! Ease of installation, easy! They also protect the bottom from getting scraped up. Researched others before purchasing these! Look no further! Get these!
Did you find this helpful?  8 of 8 Found Helpful
Verified Buyer   from Las Vegas on 9/23/2019
Perfect for tight garages
This was exactly what I needed to lift my car in my garage. Before these I had to move the Jack 7-10 times to fully lift the car, since you had to do one corner at a time and not lift too far since I couldn't get the Jack perpendicular to the car due to space restrictions. Now I only need to move the Jack twice and it's all the way up! Install was easy, scraping off the factory seam sealer was the hardest part. This is made much easier with a heat gun. Also, mine required removing one of the rear bolts on each side to get the rails on, the instructions neglected to say that was a possibility.
Did you find this helpful?  6 of 6 Found Helpful
Verified Buyer   from Tempe, Arizona on 8/25/2019
There are no reviews for this product!

Related Items

123123 - -13
Back to TOP
0 Items