Cyber Monday: Save 10% Sitewide*

Cervini's Mustang GT500 Style Hood (2013-2014)

$58.00 (6%)
This 1249 Cervini's GT500 style hood gives your 2013-2014 Mustang a unique look and aggressive style like the GT500. The hood is designed to draw hot air out of the engine bay to help keep the engine cooler and your Mustang running at its best.
Cyber Monday: Save 10% Sitewide, Use Code: CYBER10
2-3 Weeks Built to Order
Part Number: 813 1249

Choose Options

If Anderson Composites product is delivered defective or damaged, you must notify Steeda within 24 hours of delivery.

By checking this box, I accept these terms *

Write a Review


Set your 2013-2014 S197 Mustang apart with a GT500 hood! This heat extractor hood is designed after the hood used on the GT500 and gives your Mustang greater clearance in the engine bay and reduces heat.

Fully functional heat extraction to give your Mustang better performance. Cervini's made the GT500 style hood fully functional to keep your Mustang's engine bay cool. The hood also gives the engine bay additional clearance for superchargers or intake manifold upgrades. A removable drain pan is included with the hood to keep the rain off your engine in wet weather.

Easy to install and a show-quality finish. The hood can be installed at home with basic hand tools. No drilling, cutting, trimming, or modification required. The hood installs onto the factory components and does not require the use of hood pins. To take this hood a step further, Cervini's built in a channel that mounts the washer nozzles and hoses out of sight for an impressive look at shows. 

Product Benefits: 
  • GT500 style
  • Fully functional
  • Additional clearance for power adders and upgrades
  • Built-in channel for hiding washer assembly
  • Drain pan
  • Easy to install
  • Requires no modification

CA Residents: Cancer and Reproductive Harm WARNING

Hey guys, it's Chris from Steeda. And today, we're going to talk about the Cervini's GT500 style hood, fitting the 2016 to 2020 Shelby GT350! When the 2020 GT500 came out, there's absolutely no doubt that enthusiasts love that big louver in the center of the hood. It provided all kinds of additional cooling for the supercharged motor, and on top of that, it had a removable rain tray on the bottom that you can take out during track days for added cooling and aerodynamics. Cervini's saw the opportunity here and not only offered this style hood for 2016 to 2020 GT350's, but you can also get it for your 15 -17 Mustang and your 18+ Mustang, along with 2013 and 2014 Mustangs as well. So, if you're looking for that GT500 style on your particular S550 or even S197 mustang, this is the way to go. The best part about Cervini's is that they use fiberglass construction. It's ultra-high-quality. It fits absolutely awesome. It only took me about 10 minutes to align this hood perfectly in line with the fenders and everything else. I didn't need to move anything else in order to install this. And additionally, you have that ultra-cool vent in the middle with the removable rain tray on the bottom that you can take out for track days or anytime you need that added cooling or aerodynamics. You can get this hood pre-painted or unpainted and have your local body shop paint match perfectly. This hood was actually pre-painted from Cervini's and the paint match is pretty darn good considering they did not have the car to match it perfectly. Now for those GT350's that already had stripes from the factory, this is one of them. I went to a local vinyl shop and actually had these stripes installed and they match almost perfectly, once I was able to clean up the factory stripes a little bit, get some of those surface scratches and swirls off. Everything matches up perfectly in the sun and in the shade. We'll go ahead and pop the hood here and show you the underside and see what it looks like looking under the hood. Like I said, it has that removable rain tray. It was a little bit of a bear to get into place with just one person just because you have to align everything so perfectly. So, best idea is to have two people to help you hold that into place while you wrench everything down. But they include all the hardware you need in order to get that up into place. It really is an ingenious design. Looks a lot like the actual GT500 and installation really wasn't too bad. The cool part about Cervini's is that you actually are able to fish the windshield wiper line through the hood. You don't need to drill any holes in order to pin it into place like you do on the factory hood. You can get the washer nozzles and everything lined up. The factory washers work great and the only holes I had to drill were for the weather stripping, which everything was dimpled and I knew where to drill those holes. I put some duct tape around the drill bit, so I didn't go too deep. And honestly, I had this whole thing installed probably in less than an hour. Additionally, Cervini's also includes hardware to secure the factory hood latch from your old hood as well. It has hardware for the brackets on the bottom as well on either side, but again, they do include some adjustment in there so you can line it up perfectly. These cars are made by machines and people, so not everything is absolutely perfect. So, they include some adjustability in there to get that hood just perfect. So it looks great, almost factory on your GT350. Installing this hood might be a great idea if you plan to add a supercharger or any kind of forced induction in the future. You have this rain tray here that does come out, and you have all that additional cooling. You can get that heat especially if it's a Whipple or something like that. Get that heat out of the engine bay as quickly as possible. It's really an ingenious design and I'm really happy Cervini's has this offering, not only for all the S550's but also for some of the S197's as well. If you're looking for a way to make your GT350 stand out from the crowd, then the GT500 style hood from Cervini's is the way to go. If you're looking for hoods, spoilers, any kind of body parts, Cervini's is available right here at! So go ahead and check out our website if you want to see more cool Ford and Mustang content. Go ahead and hit that subscribe and notification bell to get that notification on your phone. Comment below let us know what you think of the GT500 style hood from Cervini's, and don't forget the most important thing - Speed Matters!
View Full Transcript

Fitment & Features

Manufacturer: Cervini's

Installation Information:
Level of Difficulty: Medium
Install Time: About 1 Hour
Tools Required: Ratchet, sockets, trim tool

Vehicle Fitment:
Fits Trim Levels: V6 (2013-2014), GT (2013-2014)
Fits Model Years: 2013, 2014
There are no reviews for this product!

Related Items

123123 - -1
Back to TOP
0 Items