Black Friday Sale: Save Up To 50%!

Steeda Focus RS Adjustable Rear Sway Bar (2016-2018)

$229.94
$49.98 (22%)
$179.96
Steeda has the track-proven sway bar combinations that will give you reduced body roll, adjustability, and the best handling of any sway bar package on the market.
Part Number: 555 1024
555-1024
Write a Review

Suggested Mods

Description


Steeda has the track-proven sway bar combinations that will give you reduced body roll, adjustability, and the best handling of any sway bar package on the market. Steeda's Focus RS Adjustable Rear Sway Bar for 2016-2018 Focus RS is in-house designed and manufactured to allow for adjustable roll stiffness. This increase in stiffness improves vehicle handling performance by greatly reducing understeer and also reduces overall vehicle body roll.

This blue powder coated rear sway bar is 25.4mm in diameter versus 20mm for the stock rear bar. This Steeda sway bar kit includes replacement polyurethane bushings, bushing brackets and installation instructions.

Note: This product must be run with 18" or larger wheels.

Product Benefits:

  • Adjustable stiffness
  • Improves vehicle handling
  • Reduces understeer
  • Reduces body roll
  • Includes bushings and brackets

CA Residents: Cancer and Reproductive Harm WARNING www.p65warnings.ca.gov.


Today we're gonna show you how to install Steeda's adjustable Focus RS, Rear Sway Bar. The tools need for this job is a six millimeter hex key. A T40 Torx, a 13mm socket and an 18mm socket ratchet. To start the installation you'll need to remove the metal bushing cover, as well as the two subframe support braces blocking the factory sway bar. Once removed use the 18mm socket to remove the lower nut of the end link using the 6mm key to prevent the end link from spinning. You'll need to do this on both sides. It may be easier to use the 6mm hex bit socket than an allen key. At this point you can remove the upper nuts and take out the end links but it might be easier to remove the sway bar for additional space to work with. To remove the sway bar use the 13mm socket to remove the bushing and bracket from both sides. Finish moving the end links if you have not already done so. When installing these Steeda end links make sure the washers on the inside of the bolt hole as shown. With the end links in place use the 18mm socket to secure the upper nuts. Before installing the sway bar generously lubricate the bushings with the provided grease as shown. Install the bushings onto the sway bar and place the sway bar brackets on top of the bushings to mount the sway bar. Slide the bottom spacer plate of the sway bar bracket under the bushings as shown and use the 13mm socket to torque the bolts to 42 foot-pounds. With the sway bar in place, you can now finish installing the end links with the option to choose between hard, medium and soft. So you can tune your RS suspension as needed. The last step is to replace the heat shield over the bushings and reinstall the two subframe braces using the factory hardware. Now you're ready to ride. Thanks for choosing Steeda Autosports where Speed Matters.
View Full Transcript

Fitment & Features

Manufacturer:

Manufacturer: Steeda Autosports

Installation Information:

Print Instructions:

Vehicle Fitment:

Fits Model Year: 2016
There are no reviews for this product!

Related Items

Back to TOP
0 Items