Memorial Day Sale: Save Up To 25%

Steeda Fusion Twin Turbo 2.7L EcoBoost Cold Air Intake Kit (17-20 Sport)

22 Review(s)
$56.99 (15%)
Steeda's Cold Air Intake for the Fusion Twin Turbo 2.7L EcoBoost fits 2017-2020 Sport is designed to cool to ambient temperature range significantly fast, producing more power, torque, & better gas mileage. This CAI is in-house CAD designed
Memorial Day Sale: Save Up To 25%

Part Number: 555 3214

Choose Options

Write a Review

Suggested Mods


When Ford released the awesome new 2.7l Twin Turbo EcoBoost V6 Fusion Sport, the team at Steeda couldn't wait to get their hands on one! While it's a nice improvement having some extra cubic inches and an additional turbo, the team at Steeda knew we could squeak some more horsepower out of it. Introducing our hot new Twin Turbo Fusion Cold Air kit from Steeda! Featuring an in-house CAD-designed custom Roto-molded air box that seals directly to the hood liner and utilizes 2 high-flow velocity stacks and the factory cold air feeds. It keeps the hot air out while keeping both air filters cool. That's right, we incorporated 2 high-flow, million-mile warranty air filters into this kit. Both feature Steeda's exclusive velocity stacks to help this twin-turbo beast breathe as freely as possible. What makes this kit even better is the fact that it does not require any ECM tuning, making it an easy direct bolt-on!! In addition, under steady-state driving conditions, an increase in gas mileage should be noticed.

Cooler IATs. The Steeda cold air intake gives your Fusion better intake air temperatures, this results in better performance and improved fuel economy. The lower IATs are a result of the design of the airbox, high flow filters, and the precision-molded thermoplastic velocity stack. The airbox shields your intake from the heat in the engine bay, and features an inlet scoop that draws cool fresh air into the intake. 

Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.

Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

Product Benefits
  • More Horsepower and Torque
  • No tuning required
  • Does not get heat soaked like factory air box
  • Cools to ambient temperature range significantly faster than the stock unit while producing more power
  • Precision molded velocity stacks
  • Better gas mileage
  • Reusable, cleanable filters
  • Limited lifetime warranty

CA Residents: Cancer and Reproductive Harm WARNING

Hi everybody Brian from highlighting our Cold Air Kit for the 2017 and newer Ford Fusion Sport. As you may have noticed, we're big fans of the Fusion around here and the Fusion Sports no different, but bigger power and all-wheel drive to put the power down but let's face it, when you walk around the car you pop the hood open for the first time you wonder if you're missing a second air box somewhere because that stock unit is just tiny. The airbox is a very important element in the overall performance of your vehicle. Especially in something like this that's twin-turbocharged. Now this is where our Cold Air Kit really comes into play. We utilize a much larger airbox with a huge opening at the front. This is going to take in any cool air that comes in the front of the vehicle. We also use much larger filters. We get rid of that panel filter and go to two cone style filters. These are going to flow a lot more CFM than the factory air filter will and again we're getting a that cool air into the turbos faster. Now let's back up just a little bit talk more about that. In a forced induction or a turbocharged car like this, it's important to get a lot of air to the turbos. This allows them to spool up quicker. Again more performance, more horsepower. Cooler air into the turbos means cooler in typically cooler air out, lower intake air temperatures, more timing, more horsepower and you know what a side benefit of all this is? Better gas mileage. Further enhancing the performance of this Cold Air Kit is our use of huge billet aluminum velocity stacks. One for each filter. This means we're able to start with a large opening on the filter and funnel the air down creating velocity and since this feeds each individual turbo, that means velocity into each. The turbos will spool up faster, they'll build pull more air longer and airs getting each turbo at a high rate of speed. Everything needed for installation in this Cold Air Kit is provided. Right down to the grommets so you can remount the factory intake air temperature sensor and building on that a little technical tip for you, when installing this Cold Air Kit because the airbox is so much bigger than the factory box, we recommend loosening the battery bracket and sliding the battery just toward the firewall a little bit to make sure that you have plenty of room right up front here. Do that you'll be able to squeeze this in and trust me there will be real estate left over. Another benefit is the use of serviceable air filters. This means as you're driving the car you can maintain the filters. We do offer the cleaning and recharge kit right at Another really important benefit is that this does not require a recalibration of the factory ECU. So those of you that are worried about warranty, you can install the airbox, run the factory calibration but for those of you after peak performance, you need to talk to us about tuning for this. In fact this airbox currently resides in one of the fastest Fusion Sports in North America. If you have any questions or comments, please post them below. If you enjoyed the content of this video please click like and be sure to share it with other Fusion Sport enthusiasts. To learn more about this and other products we offer for the Fusion Sport visit us at Don't forget to follow us on social media and most importantly have a great day!
View Full Transcript

Fitment & Features


Manufacturer: Steeda Autosports

Vehicle Fitment:

Fits Model Year: 2017, 2018, 2019, 2020
Fusion Model: 2.7L EcoBoost Twin Turbo

Customer Reviews

Rating Snapshot

Select a row below to filter reviews.


Average Customer Ratings


Fantastic performance piece. Creates a noticeable change in sound. Not a huge difference but you do hear it. Gaines roughly 1-2 mpg but I do drive aggressively. Not the easiest install. The advice to assemble in the house was great cause it took some time and it was hot as hell outside. Had some trouble with the sensor but eventually figured it all out. Definitely hooked to do more now. Great item Steeda, Thanks! We just need to get Ford to make another Fusion Sport, better yet ST.
Did you find this helpful?  1 of 1 Found Helpful
Works for a 2020 Ford Edge ST
It took a little work but I made it work for my '20 Edge ST. A MUCH better design than the AFE pile of garbage for the same price. It doesn't seal to the hood all that well but a lot better than the AFE one does lol. And it's not even made for this car!!!
Did you find this helpful?  8 of 8 Found Helpful
2017 Ford Fusion sport 2.7 TT
Notice top end performance, gained 2 miles per gallon on fuel if you can keep your foot out of the gas, Insulation is easier if you attach everything to the silicone couplers before you mount box I would definitely recommend this cold air intake
Did you find this helpful?  11 of 12 Found Helpful
Highly Recommend
I own a 2017 Lincoln MKZ 3.0T. My car and the Ford Fusion Sport have very similar engines but the battery in the Lincoln is a little longer than the Fusion’s battery so I had to trim about 1-2 inches off the front of the air box to get it to fit. Those blue filters look really nice under my hood and I feel an improvement in acceleration.
Did you find this helpful?  10 of 11 Found Helpful
Difficult installation
I agree, molded plastic intake hoses with silicone couplers to replace the factory accordion hoses should be included. The part is difficult to fit. I installed it when the ambient temperature was in the 40's and parts were stiff and that took lots of time. The new intake seems to add some power and sounds good.
Did you find this helpful?  3 of 3 Found Helpful
Absolute pain in the ass to get in and make sure it’s in properly but once placed it sounds amazing and performs very well however I recommend making a cover for the box they unfortunately do not include one (for the price I wish they would) but all over I do recommend getting this intake.
Did you find this helpful?  8 of 10 Found Helpful
Good product
Overall product is good on the performance side. But I think same improvements can be made as far as size goes. Once it's in its all good until you need to change your battery out. It sits about a inch or 2 from the battery.
Did you find this helpful?  3 of 3 Found Helpful
Good, needs design improvement, very tight fit, intake hoses very difficult to install. Almost installed stock air box back on. Hope the performance end of it pays off. Steeda could make a couple of improvements to make this install a little better. Overall happy its on!
Did you find this helpful?  6 of 7 Found Helpful
Good, should be better...
I think molded plastic intake hoses with silicone couplers to replace the factory accordian hoses should be part of the kit. Or as an extra cost option...but right now it's the only game in town. Steeda makes good stuff. This should be better. Are you listening Steeda?
Did you find this helpful?  10 of 10 Found Helpful
Verified Buyer  
Cold Air Intake
The instructions are pretty easy to follow and it is definitely a tight fit. You have to be careful installing the air sensor into the new air box as it takes a bit of effort to get it through the grommet. The hardest part is hooking up the turbo flex hoses as they really don't flex. It does look great once it is in place. I also installed the throttle body spacer at the same time. I'm not sure of the performance gains, but there is definitely a gain in fuel mileage.
Did you find this helpful?  13 of 14 Found Helpful
Easy installation
Great quality easy install don't even need the directions really. Sounds great looks like it belongs took 30 mins to install.
Did you find this helpful?  9 of 9 Found Helpful
Verified Buyer  
YES it works...
Do NOT listen to the nay Sayers... This intake does give you better sound, BETTER performance, AND power. It's not about MOOOOORE horsepower. We got AWD, dual turbos and 325 horses. We don't friggin need more. This gets it to you faster. You will hear the turbos kick in faster, feel your car pick up faster and the sound? Mmmm. I'm almost positive, I'll need to get the motor mounts.
Did you find this helpful?  13 of 15 Found Helpful
Well, like the part, installation was a bear. not easy getting the intake hoses back on the box.
Did you find this helpful?  4 of 5 Found Helpful
This install will test your patiences. Connecting the factory hoses were difficult
Did you find this helpful?  8 of 9 Found Helpful
Verified Buyer  
I really couldn't be happier with the results. My car is definitely quicker the sound is on another level. It also looks amazing under the hood! I just purchased the bov so I can't wait to install it
Did you find this helpful?  10 of 11 Found Helpful
Verified Buyer  
Great look after install, adds deep tone to car
The individual parts were pretty well made but installation and the instructions were a little wonky. However, after you get it in the visual is great. I have an electric blue fusion and the blue filters and black air box look great. Has a low RPM tone much like the old QuadraJet 4 barrels had back in the day.
Did you find this helpful?  13 of 16 Found Helpful
Verified Buyer  
Good enough
The front velocity stack should have been made to allow the hose to slide straight on, it is a pain to put it on. The IAT sensor locks into the stock unit. The Steeda unit uses a grommet to hold it in place. The Steeda CAI works but what makes a top of the line product is attention to the minor details. Steeda decided that good enough was acceptable. The instructions are in three sections. Remove the stock air box, assemble the Steeda unit, install the Steeda unit. I suggest you assemble the Steeda unit first, then remove the stock unit, then install the Steeda unit. Two reasons for this. (1) It makes no sense to me to take parts off my car unless the replacement is ready to be installed. (2) It is more comfortable to assemble the Steeda unit in the house while watching TV than in the garage or driveway when it is 85 plus degrees outside. Aside from the angle for the front hose it is a straight forward process to install. The visual when you open the hood is incredible. All a CAI really does is allow the engine to get air with less restriction and this does that.
Did you find this helpful?  39 of 42 Found Helpful
Great Upgrade
Installed this CAI kit for my 2017 Fusion Sport. The install was really pretty easy. I would just suggest connecting the hoses before mounting the box - it's a tight engine bay and it's tough to get the hoses into the box after it's mounted. I felt an immediate difference in performance with this kit - well worth the price. I also want to complement Steeda on their customer service. I had a small issue with the kit when I first got it. I gave them a call and they quickly sorted things out and got me up and running. It says a lot about a company for them to stand behind their products. This is my second Fusion V6 and they are both almost fully loaded with Steeda aftermarket parts. Awesome performance gains, high quality and great service is why I keep coming back.
Did you find this helpful?  23 of 25 Found Helpful
Nice kit, tough to install
After it was all said and done, I love the boost this kit gives. The stock breather box is a bottleneck with this engine. Giving each intake hose its own high airflow filter resulted in significant increase in airflow. I will point out that this kit is a pain to install only because of the front breather hose. The angle on the kit isn't right, and the hose isn't long enough to reach without twisting a little. Advice: Put the front hose on before dropping the box all the way into the engine compartment. Engine sounds meaner too! She has a nice, throaty growl at mid to high RPM!
Did you find this helpful?  20 of 22 Found Helpful
Verified Buyer  
Cold Air Kit
Installed the Steeda twin turbo cold air kit. Installation was very easy ,had to move some wiring around but it fit excellent. All the parts you need are in the kit. Top quality SS button head bolts impressed me. Had a drop in K&N filter added to stock air box but the car never performed like it does now. Looks great too! Also installed throttle body spacer ,Super stuff. Thanks Steeda !
Did you find this helpful?  17 of 19 Found Helpful
Verified Buyer  
Everything you need to know about the 17 Fusion Sport Factory Airbox and the Steeda CAI Kit
Everything you need to know about the 17 Fusion Sport Factory Airbox and the Steeda CAI Kit
Did you find this helpful?  26 of 44 Found Helpful
Fusion sport 2017
Just finished installing the new intake system on my 2017 ford fusion sport immediately noticed a big difference in performance and sound haven't done any 0 to 60 but stock I was right around five and 5.2 i would guess this should put me in the mid to high 4 second range I believe the increased in horsepower to be around 15 to 20 and probably the same for the torque awesome....thanks steeda
Did you find this helpful?  40 of 70 Found Helpful
There are no reviews for this product!

Related Items

123123 - -4
Back to TOP
0 Items