Browse Parts →
Mustang
American Mustang Performance Parts
Mustang Performance Parts

Steeda Mustang Bumpsteer Kit - 05-14

Our Price $167.95
Market Price $186.61  
You save $18.66 (10%)

Manufacturer  Steeda Autosports

555-8106
+
Add to Build List
  • Product Description
  • Installation Info
  • Mustang Fitment

If you have substantially lowered your vehicle chances are you have introduced bump steer. What is bump steer? Bump Steer is changes in toe caused by suspension movement.

Every car has bump steer, however when you lower the vehicle you increase the amount of bump steer that occurs, if this becomes excessive you will begin to notice some unwanted vehicle driving characteristics.

When you turn your steering wheel you are essentially changing the toe of the wheels to turn the vehicle. Excessive bump steer is undesireable because it introduces unwanted steering inputs which means the suspension is steering the car instead of the driver.

If your car is lowered and has tracking issues and less predictable steering behavior, you need a bump steer kit.

Steeda's Bump Steer Kits will allow you to correct your bump steer geometry and can do so without requiring you to drill or modify your vehicle spindle.

In addition, our bump steer kit makes a great service replacement for your worn out, high mileage outer tie rods even if you do not have excessive bump steer issues.

Pick up a bump steer kit today and refresh your outer tie rods and improve your steering.

Steeda Tapered Stud Bolt
Studs are made to the exact taper of the factory spindle, for a simple install every time. Requires drilling the spindle hole to a 5/8" diameter. Bit costs $17 at local Hardware Store.
Made of 4140 high-grade steel for superior strength. Basic grade 8 bolt that can vary in strength.
Machined to exact tolerances for an exact fit. Must drill spindle to bolt size, will have "play" or "slop".
Heat treated after machining to ensure hardness throughout stud. No steps taken to ensure material hardness.

Product Benefits

  • Wide range of adjustment
  • Does not require spindle modification for fitment or adjustment
  • Direct replacement installation
  • High quality construction and fit
Time to Install
About 2 Hours
Level of Difficulty
Tech Recommended
Tools Needed
Basic Tools
Install Instructions
Instructions are in PDF format. Get the free Adobe PDF Reader, here.
Model Year(s)
2014 2013 2012 2011 2010 2009 2008 2007 2006 2005

Model(s)
Bullitt GT V6 GT500 Boss

Transmission(s)
Manual Automatic

Product Reviews

If you're noticing the steering wheel move while going over a bump, you need these!

You should also pick up the X5 ball joints to go with these!

Steeda's bumpsteer kit is a must have, especially if you are running a larger wheel.

My car: 2012 V6 base coupe
When you lower your car, you change the suspension geometry (at both ends of the car). The effect of the front end is that you introduce unwanted toe changes when loading/unloading the suspension. You can feel this change through the steering wheel - it feels like the steering effort changes on it's own as you proceed through a turn, which in turn causes the front end to feel "floaty". Steeda's bump steer kit fixes that problem. It's easy to install yourself (about an hour) with normal hand tools. Remember that you must get an alignment IMMEDIATELY after installing these (you can probably take them to a Firestone or someplace and have them installed and the car aligned at the same time). The kit comes with all the necessary parts and concise instructions. Coupled with Steeda's SLA front lower control arms, your Mustang will steer and feel better than Ford actually intended. Highly recommended.