Save 13%

Steeda Competition Mustang Springs - Front Only (79-04)

List price: $229.95
$199.95
You save: $30.00 (13%)
121-4540-001
+
Add to wish list

Springs are the foundation of good handling. So start with the best. Our experience and expertise in high performance street and racing suspension systems is second to none. Put that experience to work for you. Steeda springs are all custom made to our specifications- specifications that have been refined and improved through years of testing.

Steeda's performance lowering springs improve the overall handling of the 2003 Cobra by lowering the center of gravity and reducing body roll and pitching motion. The reduced longitudinal pitch of the vehicle during heavy braking, due to the optimized spring calibration, improves the overall braking efficiency. The higher rate of the front springs reduces the amount of load transferred to the front tires. This causes the load on all four tires to be more evenly distributed providing additional traction to the rear tires. The additional gain in rear traction usually results in reduced braking distances.

The proportionate increase in spring rate also reduces body roll, which limits adverse suspension movement. This confines the suspension geometry to stay within parameters that enhance the tires contact patch relative to the road, The result is improved vehicle cornering and handling, because front and rear tire loading is more evenly distributed. Therefore, higher cornering limits can be achieved because the built in understeer characteristics are reduced and provide for a more neutral yet safe vehicle.

Competition Springs

  • Lowers the car approximately 11/4”
  • Ultimate handling with a street-able ride
  • Slightly firmer ride than Sport Springs
  • O.E. on Steeda’s 5th Anniversary Mustangs

Full Competition Springs

  • Approximate 1-1/4" to 1-1/2" lowering
  • For all out road racing competition.
  • Recommended for Mustangs with 351 engine or race weight of more than 3300 lbs.
  • Spring rate 850-1050 lbs. per inch
  • Front springs only-Use with Sport or Competition/Street rears

Steeda Springs are manufactured under these rigorous manufacturing certifications: QS-9000 & ISO 9001

Product Benefits

  • Better handling with more stable cornering
  • Designed for competition racing

All lowering springs are not created equal. Read our Steeda blog post to learn more: http://www.steedablog.com/2010/08/all-lowering-springs-are-not-created-equal/

Installation Information

Level of Difficulty:
Tech Recommended
Time of Install:
About 3 1/2 Hours
Tools Required:
Shop Tools

Manufacturer

Made in USA:
Yes
Manufacturer:
Steeda Autosports

Vehicle Fitment

Fits Model Year:
  • 1979
  • 1980
  • 1981
  • 1982
  • 1983
  • 1984
  • 1985
  • 1986
  • 1987
  • 1988
  • 1989
  • 1990
  • 1991
  • 1992
  • 1993
  • 1994
  • 1995
  • 1996
  • 1997
  • 1998
  • 1999
  • 2000
  • 2001
  • 2002
  • 2003
  • 2004
Mustang Model:
  • 2.3L
  • 5.0L V8
  • Bullitt
  • Cobra
  • Cobra R
  • GT
  • Mach 1
  • V6
Transmission Type:
  • Automatic
  • Manual

No posts found

Write a review