Steeda Ford Fusion EcoBoost Cold Air Intake (13-17)

Steeda Ford Fusion EcoBoost Cold Air Intake (13-17)
555 3174

Choose Options

Replacement Cone Filter
No Thanks
Yes [+$54.95]
Air Filter Cleaning Kit
No Thanks
Steeda Air Filter Cleaning Kit - Blue Oil [+$19.95]
Precision Air Filter Cleaning Kit - Blue Oil [+$29.95]
Precision Air Filter Cleaning Kit - Red Oil [+$29.95]

Product Install Instructions

Wake up the hidden power of your EcoBoost Fusion by taking the intake system to the next level with our in house designed tested and manufactured Steeda Cold Air System.

This cold air system does not require any ECM tuning making it an easy direct bolt on. On the 1.6L EcoBoost engines expect point to point gains of up to 10 horsepower at the wheels and point to point gains on the 2.0L EcoBoost engines of up to 18 horsepower at the wheels! Performance gains you will definitely feel! In addition under steady state driving conditions an increase in gas mileage should be noticed.

Our system was designed to utilize the cold air feed coming from the grille while the airbox seals directly to the hood liner to ensure a cool dense air charge to the engine.

Product Benefits

  • Does not get heat soaked like factory air box
  • Cools to ambient temperature range significantly faster than the stock unit while producing more power
  • Lifetime Warranty - Backed by a trusted company that has been in business for over 20 years
  • Utilizes the factory cold air feed duct from the grille
  • Does not require any engine tuning
  • Looks great - Clean OE appearance!
  • Steeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!

Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.

Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

MPN: 555-3174
Great product
Noticeable noise difference. However it should be noted that the 2016 fusions bolts that hold the air box in place have been changed to a 7 mm.
Did you find this helpful?  7 of 7 Found Helpful
Reviewed by:  from Georgia. on 8/2/2016
Awesome first upgrade
I had this CAI waiting for my '14 Fusion Titanium when it was delivered Memorial Day weekend. Already had the components assembled, so the install took 15 minutes--actually took me longer to remove the stock airbox. I have the Zeibart sound-deadening in my car, so naturally the new sound is somewhat muffled, but I can still hear the difference, even more so with the windows down. More of an aggressive note, but not overbearing at all. It was exactly the induction note I was hoping for, and the power/torque that comes with it seems right on par with the 18hp gains Steeda indicates. Need to dyno the car for exact numbers, of course, but for a "bolt on" upgrade, it's a great addition. Very good build quality, and quite lightweight. Even with no tunes, I am very happy with this CAI. Highly recommended, thanks Steeda! -AD
Did you find this helpful?  4 of 4 Found Helpful
Reviewed by:  from Texas. on 1/6/2015
This is my first Cold Air Intake install and I'm very impressed. I loved my Fusion before, but now it has an aggressive sound and seamless acceleration. Its nice to have 4 banger MPG, without sounding like a turbo
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Georgia. on 1/17/2014
Couldn't be happier!
The 2.0 EcoBoost Fusion is a great car and Steeda's intake made it even better. The intake is made very well, i was even impressed by the quality of the gasket.... It sounds AWESOME !! If you like that kind of sound and if you want quiet ? it does that to. Install was a breeze with just a few hand tools and well explained instructions. Thanks Steeda !!
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Florida. on 6/9/2014
Highly recommend!
I installed this right before a trip of 200 miles. Going up the first hill I noticed the torque increase. The 2013 Fusion 2.0 EcoBoost has not impressed me at all until now. It really brought it to life! I made this trip close to 100 times in the last year with this car with an average of 27 mpg. This time it averaged 31 mpg. This is checking with the instant fuel mileage and at the pump. Very easy installation. Highly recommend!
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Georgia. on 11/12/2014
This CAI is amazing. Not only did i gain HP and gas mileage buuuuuuuuuut my little turbo began to flutter. I never thought just a CAI could do that but this is the real deal. I HIGHLY recommend to all fellow ford owners!!!
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by: (Verified Buyer)  from Edgewater . on 5/2/2017
Awesome product
This CAI is quality! The install was easy and done in less than 1 hour. The sound from under the hood is great and lets you know there is something different going on under acceleration. You really can feel the difference in acceleration too. May have to look into the exhaust to go with it now!! Made in the USA adds the icing on this cake!!
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by:  from Florida. on 3/28/2014
Great Add-On
This is the fifth add-on for my 2016 Titanium. After lowering springs, strut tower brace, rear sway bar upgrade, and a Magnaflow cat-back system (All through Steeda), this Cold Air Intake is what makes sense. As stated by others, a little turbo flutter is noticeable at around 1800-2000 RPMs, but is negligible. I was a little disappointed with the fit. the right side (as viewing from the front), did not seal up against the bottom of the hood (The only reason for the 4 star rating). This was easily remedied by making a support utilizing some 1.25 inch light weight tubing with walking cane tips with an overall length of 7.7 inches, mounted to the bottom of the box to the lowest original air box mounting grommet. This sealed it right up against the hood. The only other thing is I wished they could supply a red filter element as well as the blue filter supplied. That's just me being picky as I have detailed with red under the hood. All-in-all, another great product from Steeda. Thank you all! I can't wait to add the tune to my Fusion.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Cocoa, Florida. on 10/9/2017
Tight Fight on 17 Fusion, but works well!
It seemed to be a bit tight of a fit on a 17 fusion - the wires for the air sensor are a tad shorter than in their videos so you have a REAL snug fit with them... took a bit to get it worked in their well compared to the videos. However, it does give a good noise (not too loud) and it seems to give me MPG gains. However, it's -10 in MN and it's hard to tell. So far, so good though. 4 stars because I'm a noob and this was my first install and I'm not sure what to expect.
Did you find this helpful? 
Reviewed by:  from MInnesota. on 1/1/2018
"Steeda" enough said!!
First of all the CAI arrived very fast, install was about 45 mins (including removal of the factory intake) simple instructions, the sound is amazing, my 2.0 breathes a TON better than the factory filter, and i can tell a slight increase taking off in my AWD. as for the "increase in fuel economy" i have not seen any difference on city or highway driving according to my AVG MPG on the dash, I do however highly recommend this product Steeda makes it simple with high quality products! thank you for that. Next on the list is a bigger turbo and tuner from Steeda!
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Michigan. on 2/8/2018
Easy enough install, 10/10 instructions. Real power gain, and cant wait to get my tune sent to me! awesome awesome awesome!
Did you find this helpful? 
Reviewed by:  from New York. on 3/14/2016
first mod
Decided to make this my first mod, mad it for a couple months and i love it. Sounds great on the car and i think it gives the OEM bov a little more sound. Super easy to install, basic tools. great product
Did you find this helpful? 
Reviewed by:  from . on 9/29/2017
Love it!
Installed in my 2013 Ford Fusion SE Ecoboost. I can definitely feel the torque. Only took about an hour for me to install considering I'm a beginner when it comes to this stuff. I had a few questions about my order and Frank and the Steeda staff were always very helpful. I highly recommend this unit and the cleaning kit. I will never have to buy one of those cheap air filters again when I get my oil change. Thanks Steeda!
Did you find this helpful? 
Reviewed by:  from Ohio . on 2/26/2015
Great product
Great product, well made and easy to install. I haven't had time to really check it out while driving, but look forward to taking her out.
Did you find this helpful?  0 of 3 Found Helpful
Reviewed by:  from Texas. on 9/19/2015
There are no reviews for this product!

Related Items

More races are won...more track records are set...and more championships are captured with vehicles using Steeda performance parts than any other brand.

Steeda, the world's largest aftermarket manufacturer of Ford performance equipment, is the leader in parts and upgrades for Mustang, Fusion, Fiesta, Focus vehicles, F-150 trucks and more. With over 4,000 items, including Steeda Manufactured Suspension/Chassis components, Induction/Cold Air Intakes and Shifters, is your one-stop for performance parts, accessories, modifications and tuning.

Our performance parts and accessories are built by true performance enthusiasts who are dedicated to the craft they love. Steeda is the culmination of over 28 continuous years of racing history, product innovation and continuous automotive refinement driven by a passion for performance and a love for great design. At Steeda, we share a wealth of our motorsports expertise and ISO 9001:2008 Certified processes in the design, engineering, and manufacturing of our performance parts to bring a completely new level of performance and excitement to every vehicle equipped with our parts. Parts are manufactured at our Steeda Valdosta Georgia complex, home to most modern and up-to-date aftermarket facility in the world.

Speed Matters®

Steeda is an ISO 9001:2008 Certified Global Manufacturer Copyright 1988-2017 Steeda Sales & Services, LLC - All Rights Reserved Worldwide.
Unauthorized duplication or copying is strictly prohibited.
Steeda is an A+ Better Business Bureau certified Business.

Ford, Ford Mustang, Ford F-150, F-150, F150 Raptor, Raptor, Mustang GT, SVT Cobra, Cobra, Ford Lightning, Supercrew, Supercab, Power Stroke, Triton V8, Mach 1 Mustang, Shelby GT 500, GT350, GT350R, Cobra R, Bullitt Mustang, SN95, S197, S550, New Edge, V6 Mustang, Fox Body Mustang, EcoBoost, 5.0 Mustang, Ford, Ford, Ford Fusion, Ford Fusion Sport, Ford Focus, Focus, RS, S, SE, SEL, SES, ST, Duratec, Titanium, Electric, ZX3, ZX4, ZX5, ZXW, SVT, LX, ZTS, ZTW, 2.0L EcoBoost, 2.3L EcoBoost Ford Fiesta, Fiesta, S, SE, ST, Titanium, Duratec, 1.6 EcoBoost, Duratorq, Ti-VCT are registered trademarks of Ford Motor Company. Steeda Sales & Service, LLC has no affiliation with the Ford Motor Company. Throughout our website and catalog these terms are used for identification purposes only.