Complete your project and give it power with a Ford Performance Coyote Gen 3 crate engine. The Gen 3 Coyote has a 12:1 compression ratio and puts out 460 hp at 7,000 rpm and 420 ft.-lb. of torque at 4,600 rpm!
The best Coyote yet with improvements over past generations. The Gen 3 Coyote sports a larger intake and exhaust valves and revised camshafts to improve power. The maximum RPM was raised to 7,500 rpm thanks to stiffer valve springs. The 12:1 compression ratio was accomplished thanks to cutouts to clear the valves and the dual-fuel system, which provides direct injection and port fuel injection.
Built for performance. The Gen 3 Coyote carried over the Sinter forged connecting rods that were used in the Gen 2 Coyote and the BOSS 302 engine. Plasma Transferred Wire Arc is used to provide superior wear protection to the head. The forged crankshaft has been rebalanced and supports high-rpm use.
**This kit includes a manual transmission engine harness and dual-mass flywheel.
- 460 hp, a 25 hp gain over the Gen 2 Coyote
- 420 lb-ft of torque, 30 more than the Gen 1 Coyote
- 7,500 rpm limiter
- 12:1 compression ratio
- Weighs only 425 pounds
- 10 qt oil capacity
- Dual fuel system (direct injection and port fuel system)
- Improved intake manifold
- Plasma Transferred Wire Arc cylinder bores
Note: Does not include an alternator, PCM, or vehicle harness.