Whipple 2010-2014 F150 / Raptor 6.2L 2.9L Supercharger 11 PSI Stage 2 Kit w/ HD Intercooler, Throttle Body, Dual fans, and injectors - Black Finish

Whipple 2010-2014 F150 / Raptor 6.2L 2.9L Supercharger 11 PSI Stage 2 Kit w/ HD Intercooler, Throttle Body, Dual fans, and injectors -  Black Finish
439 WK-2320B-STG2

Choose Options

Tune Delete [+$-200.00]
Polishing Upcharge Stage 2 (Compressor Housing, Gear Cover, Inlet, Drive, Discharge) [+$600.00]
Polishing Upcharge Stage 3 (Compressor Housing, Gear Cover, Inlet, Drive, Discharge, Manifold) [+$800.00]
Gloss White (SC, Inlet) [+$600.00]
Ford Textured Blue (SC, Inlet) [+$600.00]


With the massive success of the standard supercharger system, the Whipple engineers were able to package all the necessary options to make even more power out of the stock 6.2L engine. The Stage 2 system comes with the heavy duty, massive heat exchanger with the dual 11" Spal fans, billet dual 68mm blade throttle body, high flow 60lb/hr fuel injectors, a smaller SC pulley for increased boost and a SCT X4 flash tool for a unique calibration.

The all-new system features Whipple’s massive oversized air-to-water intercooler for unmatched cooling capacity, a unique front feed W175ax (a whopping 2.9 liters) integrated Whipple twin-screw supercharger that reaches 99% volumetric efficiency and industry leading power potential. The unique intercooled bypass system offers better acceleration and less than 1hp of consumption during cruising for excellent fuel economy. The system also includes high-flow fuel injectors, aluminum high flow intake manifold and a Whipple Reflash for the factory ECU recalibration. While others claim, Whipple Superchargers simply deliver more power per pound of boost than any other supercharger on the market today.

Front entry W175ax (2.9 liters) Whipple twin-screw supercharger that significantly outflows competitions 2.3L roots-type systems
Integrated casting to minimize bolt on pieces, adapters, leaks and flow restrictions
Integrated Crusher™shaped inlet for maximum airflow capacity and minimal rotor cavitations
Integrated Crusher™172mm oval inlet outflows smaller 90mm inlets such as other systems
Big Mouth Whipple Crusher™ plastic air inlet for increased velocity and lower inlet temps vs. steel and aluminum tubes
Billet dual 68mm high-flow throttle body
Integrated design allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas
Massive air-to-water aluminum bar-plate intercooler offers more cooling than any other positive displacement system available
Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy
Self-contained oversized oil system for dramatically reduced oil temps in even the most demanding conditions
Center discharge port for better cylinder to cylinder distribution then other twin-screws with cobbled together billet adapters and forward facing discharge
Discharge down design allows for less pressure loss which gives more power at lower boost levels
Top mount design allows for cooler operation then upside down SC’s that conduct heat from engine and are trapped by runners and covers, causing hotter manifold temps and less power per pound of boost
More boost at the “hit” than any other twin-screw
Flat torque curve for incredible acceleration
Massive oversized heat exchanger with dual 11" Spal electric fans for incredible intercooler water temps
Fits under factory hood with no modifications
No internal modifications required
Completed installation looks factory installed, not some cobbled together kit with multiple billet adapters
Kits come complete with all necessary parts and hardware for installation
Unique oil level sight glass for easy oil level and quality check, no dipstick to bind or misread
Plug and play wiring, no cutting
High flow air filter system, coolant reservoir is maintained
High flow fuel injectors (60lb/hr)
Proven 6-rib belt system with heavy duty spring loaded tensioner and adjustable idler system
Stainless steel jack-shaft with unique plastic cover for increased safety
OEM quick connect fittings for easy installation
Complete and tuner kits available
Available in wrinkle black, polish or any custom color
SCT X4 flash tool
Instant boost at the touch of the throttle
3 minute pulley changes
1 year warranty for all parts included

Product Benefits:

  • Over 175HP / 125ft/lb increase on 91 octane pump gas
  • No other upgrades required, comes complete with all necessary parts and hardware for installation
  • The Whipple Supercharger comes backed by a 1-Year Warranty from Whipple, Optional 3 year, 36,000 mile warranty
  • customizable options allow expandable power / 3 minute pulley changes
  • Not CARB approved

Note: Please allow 6-8 weeks for delivery

MPN: WK-2320B-STG2

Fitment & Features

Installation Information
Time of Install: 6 hours
Level of Difficulty: Medium
Tools Required: Shop tools

Made in USA: No

Vehicle Fitment
2010-2014 F150 2011-2014 Raptor

Customer Reviews

There are no reviews for this product!

Related Items

More races are won...more track records are set...and more championships are captured with vehicles using Steeda performance parts than any other brand.

Steeda, the world's largest aftermarket manufacturer of Ford performance equipment, is the leader in parts and upgrades for Mustang, Fusion, Fiesta, Focus vehicles, F-150 trucks and more. With over 4,000 items, including Steeda Manufactured Suspension/Chassis components, Induction/Cold Air Intakes and Shifters, Steeda.com is your one-stop for performance parts, accessories, modifications and tuning.

Our performance parts and accessories are built by true performance enthusiasts who are dedicated to the craft they love. Steeda is the culmination of over 30 continuous years of racing history, product innovation and continuous automotive refinement driven by a passion for performance and a love for great design. At Steeda, we share a wealth of our motorsports expertise and ISO 9001:2008 Certified processes in the design, engineering, and manufacturing of our performance parts to bring a completely new level of performance and excitement to every vehicle equipped with our parts. Parts are manufactured at our Steeda Valdosta Georgia complex, home to most modern and up-to-date aftermarket facility in the world.

Speed Matters®

Steeda is an ISO 9001:2008 Certified Global Manufacturer Copyright 1988-2018 Steeda Sales & Services, LLC - All Rights Reserved Worldwide.
Unauthorized duplication or copying is strictly prohibited.
Steeda is an A+ Better Business Bureau certified Business.

Ford, Ford Mustang, Ford F-150, F-150, F150 Raptor, Raptor, Mustang GT, SVT Cobra, Cobra, Ford Lightning, Supercrew, Supercab, Power Stroke, Triton V8, Mach 1 Mustang, Shelby GT 500, GT350, GT350R, Cobra R, Bullitt Mustang, SN95, S197, S550, New Edge, V6 Mustang, Fox Body Mustang, EcoBoost, 5.0 Mustang, Ford, Ford, Ford Fusion, Ford Fusion Sport, Ford Focus, Focus, RS, S, SE, SEL, SES, ST, Duratec, Titanium, Electric, ZX3, ZX4, ZX5, ZXW, SVT, LX, ZTS, ZTW, 2.0L EcoBoost, 2.3L EcoBoost Ford Fiesta, Fiesta, S, SE, ST, Titanium, Duratec, 1.6 EcoBoost, Duratorq, Ti-VCT are registered trademarks of Ford Motor Company. Steeda Sales & Service, LLC has no affiliation with the Ford Motor Company. Throughout our website and catalog these terms are used for identification purposes only.