Steeda S550 Mustang Clutch to Master Cylinder Supply Line Upgrade (2015-2020)

Steeda S550 Mustang Clutch to Master Cylinder Supply Line Upgrade (2015-2020)
Steeda S550 Mustang Clutch to Master Cylinder Supply Line Upgrade
$8.24 (39%)

FREE Shipping
Steeda Sales & Service, LLC
555 7035

Suggested Mods


Steeda is always looking to improve upon OE equipment, especially parts that have increased potential to fail. Through our research and development, it was discovered that the line from the brake master cylinder to the clutch does not sealappropriately, which is, of course, a worrisome issue. With this information in hand, Steeda did not hesitateto come up with a cost-effective solution that will withstand ALL demands.

Track and road tested, the Steeda S550 Mustang Clutch to Master Cylinder Supply Line Upgrade is the kit to alleviate all worry that failures may occur. By replacing the factory tube with our chemical-resistant line and clamps, Steeda helps avoid potential damage to your S550 Mustang by sealing the system from air intrusion. It's a small price to pay for a big relief!

Product Benefits:

  • Replaces the factory leak prone tube
  • Avoids allowing air intrusion into the clutch or brake hydraulic system
  • Protects your S550 Mustang from potential damage

CA Residents: Cancer and Reproductive Harm WARNING

Today we'll be installing Steeda's Master Cylinder to Clutch Line a Brake Kit. Park your car on a flat surface with the emergency brake engaged and place rags around and under the master cylinder as brake fluid can be corrosive to the paint. Remove the line from the brake master cylinder by pulling it and make sure the rubber gasket is removed from the nipple. Repeat this process on the other end attached to the firewall. It may be necessary to use pliers to pull this end off as it can be tight. Put the Steeda hose on the firewall end with the clamp in place and squeeze the clamp to tighten. At this point you may need to trim any excess hose before attaching to the brake master cylinder. With the clamp in place slide the hose over the nipple and tighten the clamp at the master cylinder. It may be helpful to use pliers because of the lack of room. Top off your brake fluid, pump the brake and clutch to ensure there aren't any leaks and you're good to go. Thanks for choosing Steeda where Speed Matters! Part Number: 555 7035 MPN: 555-7035

Fitment & Features


Manufacturer: Steeda Autosports

Vehicle Fitment:

Fits Model Year: 2015, 2016, 2017, 2018, 2019, 2020

Customer Reviews

This helps!
I'm one of the guys that has an S550 where the OEM supply line was found hanging off. I have had nothing but issues with the clutch feeling terrible especially with weather changes. I put this on the other week and my clutch has FELT FANTASTIC! I no longer hate driving my car.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by: Phil White from Georgia. on 6/13/2018
There are no reviews for this product!

Related Items