Steeda Mustang Bumpsteer Kit (2005-2014)

$151.96
Scratch & Dent
Part Number: 558 555 8106
×
If Anderson Composites product is delivered defective or damaged, you must notify Steeda within 24 hours of delivery.

By checking this box, I accept these terms *

Write a Review

Description


This part is a scratch and dent item sold as-is and is non-returnable, non-refundable, and cannot be exchanged due to cosmetic reasons or for missing ancillary hardware. It may have minor blemishes or missing hardware that do not affect fit or function. Product photos may not be representative of the actual item received.

If you have lowered your vehicle the chances are you have introduced bump steer. What is bump steer? Bump Steer is changes in toe caused by suspension movement. Every car has bump steer, however when you lower the vehicle you increase the amount of bump steer that occurs, if this becomes excessive you will begin to notice some unwanted vehicle driving characteristics. When you turn your steering wheel you are essentially changing the toe of the wheels to turn the vehicle. Excessive bump steer is undesirable because it introduces unwanted steering inputs which means the suspension is steering the car instead of the driver. If your car is lowered and has tracking issues and less predictable steering behavior, you need a bump steer kit. Steeda's Bump Steer Kits will allow you to correct your bump steer geometry and can do so without requiring you to drill or modify your vehicle spindle. In addition, our bump steer kit makes a great service replacement for your worn out, high mileage outer tie rods even if you do not have excessive bump steer issues.

Steeda Tapered Stud Design Advantages
Studs are CNC machined to the exact taper of the factory spindle, for a simple install every time.
Made of 4140 high-grade steel for superior strength.
Machined to exact tolerances for an exact fit.
Heat treated to our specs after machining to ensure hardness throughout stud.

Bolt Design Disadvantages
Requires drilling the spindle hole to a 5/8" diameter. Bit costs $17 at local Hardware Store.
Basic grade 8 bolt that can vary in strength.
Must drill spindle to bolt size, will have "play" or "slop".
No steps taken to ensure material hardness.

Read more from Mustang 360 about the installation process and specific benefits that can be gained from installing Steeda Ball Joints and Steeda S197 Bumpsteer kits on your S197. http://www.mustangandfords.com/how-to/chassis-suspension/1510-curing-low-roll-center-on-s197-mustangs-with-steeda-ball-joints/

Pick up a bump steer kit today and refresh your outer tie rods and improve your steering.

Note: Will not clear 16" wheels. Will not work with BOSS or BOSS Steering Rack

Product Benefits
  • Wide range of adjustment
  • Does not require spindle modification for fitment or adjustment
  • Direct replacement installation
  • High quality construction and fit
  • No permanent modifications

CA Residents: Cancer and Reproductive Harm WARNING www.p65warnings.ca.gov.

There are no reviews for this product!

Related Items

123123 - 0
Back to TOP
0 Items