TOLL-FREE 1-800-950-0774 Home | Events | Forums | Photos | Dealers | Account | My Cart | Support/Contact
Live Help
  Body Kits  Brakes  Chassis  Cooling  Dress Up  Drivetrain  Electric  Engine  Exhaust  Fuel  Induction  Steering  Suspension  Wheels

Steeda Lightweight Mustang K-Member - 96-04

Steeda Lightweight Mustang K-Member - 96-04
Click Image to Enlarge
Lightweight Mustang K-Member
555-5078 - Steeda Lightweight Mustang K-Member - $899.95
Our Price: $899.95
Market Price: $989.95
You Save: $90.00
  Installation Info
Time to Install
About 3 Hours
Level of Difficulty
Tech Recommended
Tools Needed
Basic Tools
Install Instructions
Instructions are in PDF format. Get the free Adobe PDF Reader, here.
  Product Description
Steeda's SN95 K-Member was designed to shed some weight from the front end without requring a full suspension replacement or requireing modified geometry.

Made from a mix of 4130 chrome moly and low alloy steel, our K-member is approximately 19 lbs lighter than the OE K-member. The control arm cups were designed to accept unmodified stock control arms so tubular control arms are not required.

Our k-member features 2 lower control arm mounting positions for fine tuning of roll center geometry. One position if for cars at stock ride height or less than 1 inch lower than stock. The second position is recommended for cars 1 to 1 1/2 inches lower than stock. For further roll center correction if you are lowered more than 1 1/2 inches check out our X2 Ball Joints.

Finally, while the rack can be positioned in the stock location, we've made it adjustable for changes to the Ackerman geometry. Ackerman adjustment is a must for the serious road racer.

Note: Only compatible with Rack bushings with standard 3/4 inch hole such as our urethane rack bushings. Ours as well as any other aftermarket aluminum bushings with smaller than 3/4 inch holes will not work.

Product Benefits
  • 19 pounds lighter than stock k-member
  • Accepts stock control arms and tubular control arms that work with stock K-members
  • Two control arm positions to compensate for vehicle lowering (can also be used with X2 ball joints)
  • Adjustable Ackerman geometry
  Product Fitment
 This product fits the following vehicles
  • 2004 Mustang Cobra Manual
  • 2004 Mustang GT Automatic
  • 2004 Mustang GT Manual
  • 2004 Mustang Mach 1 Automatic
  • 2004 Mustang Mach 1 Manual
  • 2004 Mustang V6 Automatic
  • 2004 Mustang V6 Manual
  • 2003 Mustang Cobra Manual
  • 2003 Mustang GT Automatic
  • 2003 Mustang GT Manual
  • 2003 Mustang Mach 1 Automatic
  • 2003 Mustang Mach 1 Manual
  • 2003 Mustang V6 Automatic
  • 2003 Mustang V6 Manual
  • 2002 Mustang Bullitt Manual
  • 2002 Mustang GT Automatic
  • 2002 Mustang GT Manual
  • 2002 Mustang V6 Automatic
  • 2002 Mustang V6 Manual
  • 2001 Mustang Cobra Manual
  • 2001 Mustang GT Automatic
  • 2001 Mustang GT Manual
  • 2001 Mustang V6 Automatic
  • 2001 Mustang V6 Manual
  • 2000 Mustang Cobra R Manual
  • 2000 Mustang GT Automatic
  • 2000 Mustang GT Manual
  • 2000 Mustang V6 Automatic
  • 2000 Mustang V6 Manual
  • 1999 Mustang Cobra Manual
  • 1999 Mustang GT Automatic
  • 1999 Mustang GT Manual
  • 1999 Mustang V6 Automatic
  • 1999 Mustang V6 Manual
  • 1998 Mustang Cobra Manual
  • 1998 Mustang GT Automatic
  • 1998 Mustang GT Manual
  • 1998 Mustang V6 Automatic
  • 1998 Mustang V6 Manual
  • 1997 Mustang Cobra Manual
  • 1997 Mustang GT Automatic
  • 1997 Mustang GT Manual
  • 1997 Mustang V6 Automatic
  • 1997 Mustang V6 Manual
  • 1996 Mustang Cobra Manual
  • 1996 Mustang GT Automatic
  • 1996 Mustang GT Manual
  • 1996 Mustang V6 Automatic
  • 1996 Mustang V6 Manual
  Product Reviews
Login or Register to write the first review.