Browse Parts →
Mustang

Hours:  M-F 8-6 EST, Sat Phone Hours 9-1 EST

Fast, Free Shipping

Mustang Performance Parts

Steeda Mustang Front Sway Bars (94-04)

Steeda Mustang Front Sway Bars (94-04)
Our Price $189.95
Market Price $239.95  
You save $50.00 (21%)
190 points

Manufacturer:  Steeda Autosports

555-1094
+
Add to Build List
  • Product Description
  • Installation Info
  • Mustang Fitment

Full 1.375" diameter for superior handling, flatter cornering and better stability. Steeda's 555-1087 bar is four pounds lighter than the stock 1987-1993 sway bar and lighter than most other aftermarket sway bars. Sway bars come with new polyurethane pivot bushings.

Note: Steeda Sway bar Spacer Kit required on 2003 & 2004 Cobra Mustangs

Year Factory or Aftermarket Steeda
85-93 1-5/16 21.5 lbs 15% stiffer 17.5 lbs
93 Cobra 1-1/8 16.5 lbs 100% stiffer 17.5 lbs
94-95 GT 27mm 9 lbs 150% stiffer 11.8 lbs
94-95 Cobra 25mm 8 lbs 220% stiffer 11.8 lbs
95 Cobra R 33mm 11.5 lbs 15% stiffer 11.8 lbs
97-98 Cobra 29mm 9.5 lbs 85% stiffer 11.8 lbs
99-02 27mm 9 lbs 150% stiffer 11.8 lbs
Addco 94-03 35mm 23.5 lbs 28% softer 11.8 lbs

Our sway bars have machined steel billet sway bar ends, whereas others on the market have coined ends. What does this mean? Our sway bar ends are machined out of billet steel round stock, in-house, on our multi-axis CNC lathes and go through hundreds of computer simulations to ensure the ultimate in strength and performance - this provides greater resistance to bending stresses, and has three major advantages:

  • These parts are less prone to cracking/fatigue failure on the ends themselves.
  • It also reduces unwanted deflection in the sway bar end. Excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate.
  • With less unwanted deflection, our bars will 'wear out’ slower - any spring will eventually become softer over time as it is cycled through its life, our bars will maintain their designed rate for longer with less unwanted deflection.

Our bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. We engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.

Product Notes

  • End link kit 122-9-8124-G required for 1994-1995 Mustangs
  • 2003-2004 Mustang Cobra requires 555-8124 Sway bar spacer kit
  • 1996-2004 Mustangs re-use the factory end link bushings

It's the little things that make a big difference when it comes to Steeda sway bars, learn more on our blog: http://www.steedablog.com/2009/07/swaybars-the-steeda-difference/

Time to Install
About 1 Hour
Level of Difficulty
Tech Recommended
Tools Needed
Basic Tools
Install Instructions
Instructions are in PDF format. Get the free Adobe PDF Reader, here.
Model Year(s)
2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994

Model(s)
Bullitt Cobra Cobra R Mach 1 GT V6

Transmission(s)
Manual Automatic

Product Reviews

Great front sway bar to compliment my other Steeda suspension parts. stiffer ride with great steering response!

Great appearence, quality welds and a nice look when installed. After installation adds extra comfort in the corners especially when going over bumps and add this with the rear sway bar as I did when lowering my car and you have a very good suspension setup for good handling, and less roll as well as a firmer yet comfortable ride!

This was added to my 94' Cobra and let me say that it handles well! From steering to looks this is the way to go. A great mod at a great price! Add this as soon as you can! Installing is easy and it will look great after you get it put on!