Steeda's Watt's Linkage - 05-10 |
|
|
|
|
|
Steeda's Watt's Linkage - S197
|
|
|
 |
|
 |
 |
555-2525
Steeda Watt's Linkage - 05-10 |
$999.95
 |
|
|
|
|
Product Details
Replace your factory panhard bar with Steeda’s Watts Linkage. The Steeda Watt’s Linkage is all new and a definite “step above” EVERYTHING available today in the marketplace. When you combine this rear suspension element with our other track tested and proven suspension products, you will certainly end up with a suspension system that is the very best available anywhere. Steeda’s Watts Linkage eliminates the unwanted lateral motion inherent in the geometry of the factory panhard bar in its operating range. Eliminating the lateral movement of the axle will provide for a more stable and confidence inspiring feeling as your vehicle’s suspension moves through its range of motion. Constructed out of tubular chrome moly alloy steel, not mild steel like competitors. TWICE as strong and lighter than mild steel competitors keeping weight to a minimum with superior strength.
 Although the concept of the watts link is not new, Steeda has set itself apart from the competition through innovation. On a Watt's Link-equipped vehicle, the center pivot of the center link is the rear roll center. Steeda’s Watts Linkage allows the center pivot to move up or down to adjust your roll center up or down. Further, the lateral links should be horizontal and the center link vertical with the vehicle at ride height. Steeda’s Watts Linkage maintains this ideal geometry unlike the competition. When the links are not set up horizontal at ride height, there can be significant increases in scrub in one or both directions of travel. In addition to the best performance, Steeda goes the extra mile to eliminate unwanted NVH with the use of polyurethane bushings.
This product is for the most discerning street performance enthusiast and also for the track enthusiast seeking maximum performance and control. The loose axle feeling with the Panhard Bar (due to lateral axle movement) doesn't always inspire confidence when tossing the car around. The tight, responsive feeling with a Watt's Linkage will allow a typical driver to achieve much better feel and control when pushing the vehicle to its maximum limits.
Note: Not compatible with convertibles, Eibach rear swaybar or Ford Racing rear swaybar.
 |
Time of Install
About 3 1/2 Hours |
 |
Tools Required
Shop Tools Needed |
|
 |
Level of Difficulty
4 of 5 - Tech Recommended |
 |
Installation Instructions
Click To View PDF |
|
|
Product Benefits
- Lightweight, high strength, 4130 steel
- Urethane bushings to eliminate added NVH
- Aerospace grade ball bearings for precise movement
Fits Vehicle Model:
Ford Mustang GT, Shelby GT500 & All S197 Ford Mustangs (Will not fit convertibles)
Fits Model Year:
2005, 2006, 2007, 2008, 2009, 2010 |
|
| |
 |
|
|
| |
|
| May We Recommend... |
|
|
 |
|
