 |
Product Details
Steeda's control arm relocation kit raises the front roll center of the vehicle, which becomes lower as a result of lowering the vehicle with lowering springs.
Raising the roll center eliminates the issues associated with the lower roll center, making for a great improvement in handling by reducing body roll and improving the front tire contact patch without increasing spring rate or roll bar rate.
This kit will raise the front lower control arm inner mounting location by 3/4 of an inch (19mm). Highly recommended for the open track and competition driver looking to maximize handling.
NOTES:
- Relocation kit changes bump steer geometry, Steeda's bump steer kit is highly recommended with this upgrade.
- Welding required for installation.
- When using the G-Trac Brace with the Control arm Relocation kit two 14mm - 2.0 x 100mm long bolts are required for installation.
 |
Time of Install
About 6 Hours |
 |
Tools Required
Shop Tools Needed |
|
 |
Level of Difficulty
4 of 5 - Tech Recommended |
 |
Installation Instructions
NA |
|
|
Product Benefits
Fits Vehicle Model:
Ford Mustang
Fits Model Year:
2005, 2006, 2007, 2008, 2009, 2010 |
|
