Steeda is proud to be featured in the National Institute of Standards and Technology’s “Make it in America” campaign. (Click here to see the feature)
We would also like to thank WORZ 104.3 FM radio and Frank Patterson for having Dario Orlando on the air to talk about Steeda’s commitment to America and our support of the American worker.
At Steeda we pride ourselves in making the best products manufactured in America by American workers. With our state of the art facility in Valdosta, Georgia and our company headquarters in Pompano Beach, Florida, we proudly help support our local and national economies. There has never been a better or more important time to buy American made products than right now.
At Steeda we are proud to produce all Steeda brand parts right here in the USA.
The new Ford Mustang Boss 302 is viewed by many as the best overall Mustang Ford has ever produced. As good as it is in original form Steeda has found ways to improve it and take it to the next level.
Starting with the suspension, the Steeda Boss springs are designed to slightly lower the vehicle in the front and lower the rear approximately 3/4”. With the front height remaining largely unchanged, the front roll center geometry remains optimal. However, by substantially increasing spring rates, body roll is reduced as is nose diving during heavy braking. Thanks to our years of experience with Mustangs, we are able to do this and still maintain near stock ride quality characteristics.
We have also designed several levels of suspension packages that include our awesome Boss springs, adjustable front and rear swaybars , adjustable upper strut mounts and more to achieve the maximum handling potential of the Boss 302 Mustang.With the new Boss 302 Mustang comes the new Boss 302 engine. We took our years of experience building performance proven cold air induction kits and designed a kit tailor made for this heavy breathing new engine. Starting with a high flow filter we added our “race tested” velocity stack” entry, this is located within a stainless steel heat shield with a rubber gasket to seal it against the hood. We also retain the factory cold air feed duct from the front bumper. We then added a 101mm MAF housing which is coupled to a new high flow inlet tube with our Cool-Tube technology. All of this adds up to 30 plus horsepower when combined with the required custom tune that compensates for the increased airflow.
So if you are looking to get the most out of your Boss 302 Mustang, look no further than Steeda Autosports!
On behalf of the entire team at Steeda Autosports, I want to wish all of our customers, friends, and industry partners the very best during this Holiday Season. As we reflect upon the past year, everyone at Steeda Autosports fully realizes just how fortunate we are to have such loyal and dedicated customers that support our passion for performance – for that, we are all extremely grateful.
As we embark into 2012, it is very important to remember to enjoy the simple things in life that matter most, and to maintain a lifestyle that keeps a strong family focus in everything you do, because it is these things in life that really matter most. And let’s not forget about our dedicated service men and women in our armed forces during this Holiday Season – it is because of their sacrifices that we all can enjoy a safe and free holiday celebration once again this year.
From myself and the entire Steeda Autosports Team – have a very happy holiday and prosperous New Year and we look forward to supporting your performance needs in 2012 and beyond.
Steeda – Speed Matters