Steeda Cold Air Kits – Simply The Best Available

The theory behind performance Cold Air Intakes is to let your engine breathe better by allowing for a less restrictive flow of cooler air into your engine – thereby improving your engine’s overall performance level. But what most people do not realize is that while fundamentality most Cold Air Intakes may all look somewhat alike, in practicality there are HUGE DIFFERENCES in their actual on-car performance capabilities at different engine speeds. Rest assured that all Steeda Cold Air Intakes are extensively engineered with the latest computer simulation systems, and then exhaustively tested in real world high performance conditions on the dyno, street, racetrack, and dragstrip to be the best you can buy for your Ford performance vehicle.

The engineering team at Steeda has taken the guesswork and “black magic” out of the various systems that are available today. As a validation of our superiority, our Cold Air Intakes were tested by Ford Motor Company and were found to be far superior to any other Cold Air Intake available in the marketplace – so much so that they were chosen by Ford Racing to be standard equipment on the Shelby GT and GT-H program. No other Ford performance company can make this claim!

The Steeda Difference

Factors you should consider before you buy a Cold Air Intake system include:

Airflow

An increase in total airflow is a must for performance gains. After all, your engine is in simplest terms – an air pump fueled by gasoline. Key to performance is the fact that you need a low restrictive air filter that allows for the free flow of air but at the same time it must protect your engine from harmful contaminates. At Steeda, our proprietary air filter element walks the fine line between performance and protection to consistently deliver the increased volume of air your performance engine needs under all power conditions – from idle to full power, and yet maintains full protection, ensuring that only a clean air charge enters your engine. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap even for the novice.

Turbulence

This is perhaps one of the MAJOR differences in Cold Air Intakes as it is most often overlooked by other manufacturers – it is what separates Steeda from all other systems you can buy. With an increased airflow thru the inlet tube, any bend, restriction, rough surface, or change in the inlet tube diameter will create a change in air flow turbulence. No matter where this turbulence change occurs, it will affect the flow of incoming air that crosses your mass air meter and will send incorrect sensor signals to your engines engine control module – resulting in an incorrect air/fuel mixture being delivered into your engine. Oftentimes, an inept engineer or a shortcut in design will be made that will not take this into account by only focusing on airflow. At Steeda, using proprietary measuring and flow testing techniques, we evaluate the impact on turbulence throughout the entire inlet tube to ensure that the airflow into your engine is as smooth as possible thereby avoiding any potential wrongful mass air readings and undue flow restrictions.

Air Box Location

Many manufactures concentrate on placing the inlet tube/air filter into the fender area of the car in an effort to avoid the heated air in the engine compartment thinking that is the principal issue at hand. While their intentions may be good, it is a practice that is shortsighted at best. At Steeda, we extensively evaluated ALL potential alternatives when we design our cold air intakes and their placement in a vehicle. Using the latest digital thermo sensors combined with our digital airflow and turbulence monitors, we have determined that placing the inlet in the fender area does not result in an overall improvement in engine performance – instead it actually robs you of your engines full horsepower potential. Placement of the inlet in the fender most often always causes additional bends and restrictions – extremely harmful to effective airflow. So harmful in fact that the purported benefit for placing the inlet tube inside the fender is wiped out by increased restrictions and turbulence. We design our intake and stainless steel heat shield to capture the coolest intake charge possible without compromises or penalties so that you get the maximum amount of power. Additionally, we employ our unique Cool Tube Technology to minimize potentially absorbed heat gain from the engine.

Air Filter

At Steeda we use only the best air filter media element available today. We have tested all brands and makes and have engineered a media element that is simply without equal. Sure, ours may cost slightly more, but when you cut through all of the hype – there is no better media element available – PERIOD.

The Steeda air filter element is a special state-of-the-art synthetic nano-fiber material specially constructed so that it that traps the smallest contamination particles that ordinary air filters simply cannot capture. Our filters are so good, that they capture particles that are smaller than 0.5 microns – far better than other competitive filters. There is a reason why Ford Motor Company chose Steeda air filters over all other filters for their Shelby GT program. Our filters are constructed using the finest materials available in the market today and with maximum airflow and maximum protection, you are guaranteed that the Steeda air-element is the best you can buy – PERIOD. All Steeda air filters are are 100% washable and reusable and come with a standard lifetime warranty – your guarantee of quality.

Calibration

Our Cold Air Intakes for 2005-2009 Mustang are so effective at unlocking the hidden power potential of your engine, that you are required to have the calibration of your engine modified so that you are assured to have the proper air/fuel mixture. For the Mustang GTs that are compatible with our Adaptive Performance calibration, you will realize a performance gain of up to 45 horsepower to the rear wheels using our cold air intake and charge motion delete plates with improved drivability at all speeds. Typical of the power potential Steeda intake components provide.

What should you do now?
Call us at 954-960-0774 and talk to one of our Steeda Sales Professionals. Our staff of highly trained and well qualified professionals can talk to you about your specific application and needs and can spec out a Cold Air Intake and a performance tune that will exceed your expectations and deliver to you the most for your hard earned performance dollar.

SteedaYour Best Value for Quality Performance Products